nasty lil sbc (404ci)
03-29-2009, 03:07 PM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Feb 2007
Location: SOUTH SIDE (CHI)
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
nasty lil sbc (404ci) 404ci sbc
stock 400 block 20 over
lunati pro series crank
oliver rods
ross max dome pistons around 14.5 to1
lunati cam 680 645 283 292 106
crane pro series lifters
BRODIX-10 done by rons porting service
2.080 1.600 valves
titanium ret
crower rockers & crane stud girdle
cloves chain
fluid dampner
melling select hv oil pump
all arp bolts
canton oil pan & pick up
speed pro plasma moly rings
tci flex plate
holly strip dominator intake port matched to the heads
now for the bad the motor spun a bearing 2 weeks ago.so the buyer will need to buy new bearings and cut and polish the crank.the motor was new the beginning of last year.there is ruffly 22 runs on the motor.i spent around $8500on the motor.i would like to get $4500 for everything intake to pan or i can fix it for $6500 complete.I'm sure i forgot something so feel free to pm me with any questions.
motor went a best of 10.12 @135 with a 1.33 60ft n/a in a 3470lb ws6
it made 523rwhp & 537rwt on motor never sprayed
warrnbllflooring@yahoo.com
pics upon request
stock 400 block 20 over
lunati pro series crank
oliver rods
ross max dome pistons around 14.5 to1
lunati cam 680 645 283 292 106
crane pro series lifters
BRODIX-10 done by rons porting service
2.080 1.600 valves
titanium ret
crower rockers & crane stud girdle
cloves chain
fluid dampner
melling select hv oil pump
all arp bolts
canton oil pan & pick up
speed pro plasma moly rings
tci flex plate
holly strip dominator intake port matched to the heads
now for the bad the motor spun a bearing 2 weeks ago.so the buyer will need to buy new bearings and cut and polish the crank.the motor was new the beginning of last year.there is ruffly 22 runs on the motor.i spent around $8500on the motor.i would like to get $4500 for everything intake to pan or i can fix it for $6500 complete.I'm sure i forgot something so feel free to pm me with any questions.
motor went a best of 10.12 @135 with a 1.33 60ft n/a in a 3470lb ws6
it made 523rwhp & 537rwt on motor never sprayed
warrnbllflooring@yahoo.com
pics upon request
