CC Pro Magnum 1.6 SA RR 3/8" Stud
04-07-2009, 05:32 PM
#1
Teching In
Thread Starter
CC Pro Magnum 1.6 SA RR 3/8" Stud This is a as NEW set of part # 1318-16 roller rockers and poly locks. Installed on a 1994 Roadmaster wagon. Push rods would not clear the holes in heads. They were run for a couple of days. Less than 100 miles. They are new for all practical purposes. Summit sells these for $299 plus $10 to ship. $250 or BO...............
Listed in Summit:
Brand: COMP Cams
Product Line: COMP Cams Pro Magnum Roller Rocker Arms
Part Type: Rocker Arms
Part Number: CCA-1318-16
Rocker Arm Mounting Style: Stud
Rocker Arm Ratio: 1.6
Rocker Arm Style: Full roller
Stud Size: 3/8 in.
Shims Included: No
Rocker Arm Material: Chromemoly steel
Self-Aligning: Yes
Rocker Arm Body Style: Standard
Rocker Arm Nut Style: Polylock
Slot Width (in): 0.562 in.
Maximum Spring Diameter (in): 1.500 in.
Rocker Arm Finish: Natural
Quantity: Sold as a set of 16.
Rocker Arms, Stud Mount, Full Roller, Steel, 1.6 Ratio, Fits 3/8 in. Stud, Chevy, Small Block, Set of 16
Listed in Summit:
Brand: COMP Cams
Product Line: COMP Cams Pro Magnum Roller Rocker Arms
Part Type: Rocker Arms
Part Number: CCA-1318-16
Rocker Arm Mounting Style: Stud
Rocker Arm Ratio: 1.6
Rocker Arm Style: Full roller
Stud Size: 3/8 in.
Shims Included: No
Rocker Arm Material: Chromemoly steel
Self-Aligning: Yes
Rocker Arm Body Style: Standard
Rocker Arm Nut Style: Polylock
Slot Width (in): 0.562 in.
Maximum Spring Diameter (in): 1.500 in.
Rocker Arm Finish: Natural
Quantity: Sold as a set of 16.
Rocker Arms, Stud Mount, Full Roller, Steel, 1.6 Ratio, Fits 3/8 in. Stud, Chevy, Small Block, Set of 16
Last edited by BigBlackBeaSSt; 04-07-2009 at 05:41 PM.
