LT1 stuff
04-26-2009, 10:45 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (30)
Join Date: Jan 2008
Posts: 679
Likes: 0
Received 0 Likes
on
0 Posts
LT1 stuff All prices do not include shipping unless stated. Sold my LT1 Camaro and need this stuff moved
-Total of 8 salad shooter with center caps - $50 for 4 with bad tires or $120 for 4 with good tires (toyo 245/50/16 with 1/2 life or so)
-Misc. seat belt stuff, can get pics - $make offer
-LT1 stock valve covers, painted chevy orange - $40 shipped
-Lightly ported "561" casting heads, stock valve springs, stock rockers, basically just had transitions smoothed out and casting flashing removed, can have flowed if necessary, PM for more info - $450
-LT4 Extreme Duty Timing set, brand new, was put on assembled engine and turned over a few times - $200 shipped
-CC503 cam, has about 8,000 miles on it - $175
-LT1 rebuilt shortblock, reused stock pistons, rods and crank. Motor only had 62K miles on it and it was one of the cleanest I have ever seen inside. I pulled everything apart and everything was 100% in spec. I have all of the original bearings and everything out of it if someone wants to see. I installed new rings, all new bearings, and freeze plugs. Everything was cleaned up very nicely as well. Clearance is about .0022-.0025 on everything in the bottom end. Has the stock GM oil pump with GM white spring installed. Comes with pan and lower end gasket set. Motor was built by a local shop and I have all receipts for it. Have nearly 2 times this invested!!! Just need to move - $800
Harbor Freight 1000 LB. engine stand, like new, actually not built all that bad - $30
Stock 1997 LT1 cam, long dowel pin, 7K miles - $50
2 stock LT1 timing sets - $20 shipped each
Driver's side power seat track - $40
Driver's side window for 93-02 Camaro or Firebird - $50
Camaro Door wiring harnesses, were cut at the door, but have all the pigtails - $25 shipped
Camaro hood insulation, 2 sets, both have a small rip - $make offer
Stock panhard bar, decent shape - $10
Light gray rear hatch plastic, need a good cleaning - $15
Stock 7.2" pushrods, great shape - $10
I will be adding more stuff next weekend when I go home. I have a lot of things that I know I am forgetting. Make me some offers on this stuff. Its not doing me any good collecting dust and I know that there is someone out there that can use all of this stuff. I will work with anyone on shipping the motor or I will deliver within 250 miles of me. PM me for details.
WILLING TO TRADE FOR LSX PARTS OR SOME OTHER VARIOUS THINGS:
-LS1 lid
-smooth bellow
-WS6 hood
-WS6 wheels
-98 LS1 M6 PCM
-Total of 8 salad shooter with center caps - $50 for 4 with bad tires or $120 for 4 with good tires (toyo 245/50/16 with 1/2 life or so)
-Misc. seat belt stuff, can get pics - $make offer
-LT1 stock valve covers, painted chevy orange - $40 shipped
-Lightly ported "561" casting heads, stock valve springs, stock rockers, basically just had transitions smoothed out and casting flashing removed, can have flowed if necessary, PM for more info - $450
-LT4 Extreme Duty Timing set, brand new, was put on assembled engine and turned over a few times - $200 shipped
-CC503 cam, has about 8,000 miles on it - $175
-LT1 rebuilt shortblock, reused stock pistons, rods and crank. Motor only had 62K miles on it and it was one of the cleanest I have ever seen inside. I pulled everything apart and everything was 100% in spec. I have all of the original bearings and everything out of it if someone wants to see. I installed new rings, all new bearings, and freeze plugs. Everything was cleaned up very nicely as well. Clearance is about .0022-.0025 on everything in the bottom end. Has the stock GM oil pump with GM white spring installed. Comes with pan and lower end gasket set. Motor was built by a local shop and I have all receipts for it. Have nearly 2 times this invested!!! Just need to move - $800
Harbor Freight 1000 LB. engine stand, like new, actually not built all that bad - $30
Stock 1997 LT1 cam, long dowel pin, 7K miles - $50
2 stock LT1 timing sets - $20 shipped each
Driver's side power seat track - $40
Driver's side window for 93-02 Camaro or Firebird - $50
Camaro Door wiring harnesses, were cut at the door, but have all the pigtails - $25 shipped
Camaro hood insulation, 2 sets, both have a small rip - $make offer
Stock panhard bar, decent shape - $10
Light gray rear hatch plastic, need a good cleaning - $15
Stock 7.2" pushrods, great shape - $10
I will be adding more stuff next weekend when I go home. I have a lot of things that I know I am forgetting. Make me some offers on this stuff. Its not doing me any good collecting dust and I know that there is someone out there that can use all of this stuff. I will work with anyone on shipping the motor or I will deliver within 250 miles of me. PM me for details.
WILLING TO TRADE FOR LSX PARTS OR SOME OTHER VARIOUS THINGS:
-LS1 lid
-smooth bellow
-WS6 hood
-WS6 wheels
-98 LS1 M6 PCM
