Accel 32 lb/hr Fuel Injectors
#21
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i know im asking alot of question lol but this is my first build plus u get alot of free bumps
, but whats the diff between the red top, green top, these i see all diff kinds some rated at the same lbs per hr but costs varying pretty drastically.
![Tongue](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_tongue.gif)
#22
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Im not 100% sure on the exact differences but I know the red vs. green SVO's have different flow charistics at different PSI and loads. If I can remember right I remember reading something where the red tops and green tops were tested at 3bar pressure and they each flowed a bit above and a bit below their advertised rating. Within (1-3%) I can't remember which is which. Do some searches on here and you will probably be able to find it. I know that the only difference in the yellow top vs. silver top Accell's is the age. Mine are the yellow top so they are a bit older than the new silvers. Like I said though I had really good luck with them, and in your case I dont think the injector slopes/flow is really important to this application. If you had a blower car or a motor that was on the edge of a set of injectors then it would matter more. Like I said though I'd do some looking if you really want some better info on them.
And don't worry about it I'm happy to help out a fellow LT1 guy.
![Hijacked!](https://ls1tech.com/forums/images/smilies/myhijacked2.gif)