Z06_Joe

iTrader: (8)

If you own any type of polished aluminum or chrome wheels this is for you. Make your CCW, iForged, HRE, 360 etc wheels look better than new with Blingmaster. I have personally owned 3 sets of CCW wheels so I can tell you how hard it is to keep up on polished aluminum. I have tried everything from Mothers, Wenol and even Flitz and nothing compares to the shine and ease of use Blingmaster has to offer. Simply use a clean microfiber towel with a little bit of the polish and go to work. The best part about this polish is the easy removal. With most others you really need to work at it to get the black residue off but not with Blingmaster.


Click The First Pic Below To Order Your Today!!! We Even Include A Free Microfiber Polishing Towel With Your Order So Your Ready To Go To Work As Soon As Your Order Arrives.




















As you can see in all of the above pictures Blingmaster does an excellent job at removing fuel and soot deposits from your exhaust tips achieving a chrome like shine to even stainlees steel. A little elbow grease is all it takes.

We have sold hundreds of bottles of Blingmaster on corvetteforum.com and have just taken on LS1tech as new forum.

I post under the same forum name: z06_joe (screen name is a clickable link to my page over on corvetteforum.com) so feel free to look me up on that site for some credentials. If you have any questions feel free to PM or email me. We offer a huge selection of detailing products on our site so check it out.

Click the bottles below to order yours today.


Joe
www.detailsupplyonline.com

Z06_Joe

iTrader: (8)

DO NOT TRY THIS AT HOME. DO NOT USE ACID ON POLISHED ALUMINUM WHEELS.

Ok everyone here is a real world no gimmick test of the Blingmaster Metal polish in an extreme situation.

I took and old alumninum accumulator that was from my old C5 Corvette that has been laying on the floor in the shop for over a year. Its not a pretty piece, it has scratches dings and pitting in the metal. It has not been cared for.


Here is the part in its natural state, nothing fancy here


This is a wheel acid we manufacture for heavy brake dust on painted or chrome wheels, it destroys the finish on aluminum.


A quick rinse with clean water to remove the acid.


And here you go, if anyone here has ever used a harsh wheel cleaner or all purpose cleaner on their wheels I'm sure this dull white finish looks familiar.


Here is the amount of product you need, you use a very small amount of polish to achieve great results.


Work the polish in until you start to see the black residue.


And here are your results, this was all done by hand folks. No machines were used.


Here is another area I polished up, real world results with the polish and a microfiber towel.


Now keep in mind everyone, this is not a nice piece of material were working on. This is a dried up, uncared for AC drier that we scarred with acid for this test. Your wheels, trim, exhaust tips and intake piping will come out even better.

This is a one step process that will polish up and also leave a layer of protection on the metal behind so future cleanings will be even easier. No tools or special skills are required, just the towel we provide and some elbow grease.

I hope everyone enjoyed reading this post.

Joe

porksoda

iTrader: (39)

HMMM I may have to try this. Is the coupon code in your sig good for this polish?

Z06_Joe

iTrader: (8)

yes sir it sure is and you still get the free microfiber towel with your order.

Joe

porksoda

iTrader: (39)

I still have a full can of "Hot Rims" but I am tempted to try this out.

Z06_Joe

iTrader: (8)

Give it a shot and use coupon code: corvette10 at checkout for 10% off.

Joe

Z06_Joe

iTrader: (8)

All pending orders have shipped out. Thank you everyone for your business, your tracking numbers have been sent to the email address we have on file.

Have a great week!!!

Joe
www.detailsupplyonline.com

charlie31603

iTrader: (3)

This will work on stainless steel correct? Got a borla cat back on my grand prix and the tips need to be polished BAD. Also since your located right next to the junkyards I frequent allot. Can I just stop by and pick some up? Thanks. Adam :-)

Z06_Joe

iTrader: (8)

Sure stop on in.

Joe

Z06_Joe

iTrader: (8)

Thanks again to everyone who placed an order, your tracking numbers were sent to the email address we have on file.

Joe

Donohue96M6Z28

iTrader: (64)

Man, I might have to hop on this deal. Problem is, is that the center of my Fikses are anodized, and my lips are polished.. Is there any type of cleaner to take off some hardwater stains on the anodized portions??

Is the polish a "watery" state, or is it kind of a "lotion consistency"?

Z06_Joe

iTrader: (8)

The polish is a watery type and not a cream. You could use it on the andonized areas because andonizing is basically a plating but you cannot press hard. You just simply wipe the andonized areas and the solvents in the polish will remove the waterspots. Now on the aluminum lips you can press hard and get that chrome like shine.

Joe

amc91z

iTrader: (1)

just placed an order

Z06_Joe

iTrader: (8)

Thanks for the order, It will ship out tomorrow.

Joe

Z06_Joe

iTrader: (8)

Ok we had a customer come in with a set of custom wheel adapters which he wanted polished so we once again used the Blingmaster. There are "used" forged aluminum adapters that we did not clean, did not acid wash or even wipe down with a towel. We went straight into polishing.

Here is one of the spacres in the state it was brought to us in. Nothing fancy here. We put it into a wooden vise to hold it steady while it was polished.



This time we used a power buff ball to take the work out of the polishing, I applied a small amount of the Blingmaster onto the buff ball and went to work.





Here is the finished results, I placed the first one I polished next to one of the untouched adapters. You can clearly see the difference between the two. The metal is smooth, shiny and free from defects. This will look great when its bolted up to the customers new chrome wheels.






CLICK THE PIC ABOVE TO ORDER YOURS TODAY.

Z06_Joe

iTrader: (8)

All pending orders have shipped out. Thanks again everyone, be sure to check out our new items. Have a great weekend.

Joe
THE NEXT LEVEL OF CAR CARE

Z06_Joe

iTrader: (8)

All pending orders as of 8/18 have shipped out. Thanks again everyone, be sure to check out our new items. We have added the complete Meguiar's line and will be adding another professional wax/polish/glaze/compound line to the website starting tomorrow called Hi-Temp.

Joe
THE NEXT LEVEL OF CAR CARE

djjab57

iTrader: (17)

go ahead and send mine out as well

Z06_Joe

iTrader: (8)

Got the order! Thank you .

Joe

Z06_Joe

iTrader: (8)

All pending orders as of 8/20 have shipped out. Thanks again everyone, be sure to check out our new items. We have added the complete Meguiar's line as well as Hi-Temp polishes, waxes, and compounds. Hi-Temp has some really great synthetic waxes under their belt. Also check out their Magnum 357 Water Based Polish Leveler.

Joe
THE NEXT LEVEL OF CAR CARE