LT1 Parts For Sale
09-04-2009, 09:25 AM
#1
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Feb 2005
Location: Naples, FL
Posts: 1,118
Likes: 0
Received 0 Likes
on
0 Posts
LT1 Parts For Sale Procharger D1sc kit
93-97 F-body Twin intercooled system with 12-rib pulleys. The head unit was just freshened up with new seals and bearings (a seal was leaking, had the entire head unit gone through). Kit will include a custom metal intake tube for the blower, and all plumbing from the blower to the intercoolers and back to the TB. The plumbing is set up for a blow through MAF configuration. Only thing you'll have to do is re-install the stock Procharger bypass valve, or install the bypass valve of your choice. Also have a Reichard Racing ultra-grip 3.25" pulley that was dropped and slightly damaged. Should be useable though. The TB elbow is a polished Vortech piece and has a hole in it for the methanol nozzle. $3000 obo
Alky Control Methanol Injection System
Kit is for a 93-02 F-body, but can be adapted to other vehicles easily. The only parts that are specific to the car is the meth resevoir and some of the lines. This is the Progressive kit that uses a 2 or 3bar MAP sensor. The kit comes with a 2bar. Asking $300 obo
Pacesetter Longtube Headers
Non-Emissions for 93-97 LT1 F-body cars. The ceramic coating isnt shiny anymore, but is still in decent shape. Will throw in the rest of my exhaust system with them. The remaining exhaust consists of a modified ORY that now merges to a 4". And a y-back section that is all 4" with a Dynomax bullet muffler and a turndown directly in front of the axle. Good for a race car, far too loud for anything street going. SOLD!!!
Should be adding a TH400 setup and more than likely my entire engine combo shortly. Just gotta get an ok from the engine builder before I would feel right selling any of it.
Will get pics of everything up shortly
93-97 F-body Twin intercooled system with 12-rib pulleys. The head unit was just freshened up with new seals and bearings (a seal was leaking, had the entire head unit gone through). Kit will include a custom metal intake tube for the blower, and all plumbing from the blower to the intercoolers and back to the TB. The plumbing is set up for a blow through MAF configuration. Only thing you'll have to do is re-install the stock Procharger bypass valve, or install the bypass valve of your choice. Also have a Reichard Racing ultra-grip 3.25" pulley that was dropped and slightly damaged. Should be useable though. The TB elbow is a polished Vortech piece and has a hole in it for the methanol nozzle. $3000 obo
Alky Control Methanol Injection System
Kit is for a 93-02 F-body, but can be adapted to other vehicles easily. The only parts that are specific to the car is the meth resevoir and some of the lines. This is the Progressive kit that uses a 2 or 3bar MAP sensor. The kit comes with a 2bar. Asking $300 obo
Pacesetter Longtube Headers
Non-Emissions for 93-97 LT1 F-body cars. The ceramic coating isnt shiny anymore, but is still in decent shape. Will throw in the rest of my exhaust system with them. The remaining exhaust consists of a modified ORY that now merges to a 4". And a y-back section that is all 4" with a Dynomax bullet muffler and a turndown directly in front of the axle. Good for a race car, far too loud for anything street going. SOLD!!!
Should be adding a TH400 setup and more than likely my entire engine combo shortly. Just gotta get an ok from the engine builder before I would feel right selling any of it.
Will get pics of everything up shortly
Last edited by Fire67; 09-08-2009 at 08:59 AM.
