For Sale: SBF Canfield 192cc heads
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Canfield 192cc 20-450-58-1 brand new 2.02/1.60" Manley s/s valves 0 miles since machine work
one head has a weld repair that Naiser Racing Components did for a damaged spark plug hole. they did a phenomenal job on it, and pressure checked both heads afterwards. 5-angle valve job was done by B&G in Alvin. the heads were milled .030" to bring the combustion chambers to 58cc. intake ports have been matched to a 1262 gasket, and the exhaust ports will accommodate a 1-7/8" header nicely. i have no flow numbers for these, but would estimate around 280cfm at .600" lift. these would be awesome heads for a big cube windsor, or a boosted or sprayed 306/331/347. springs are good for a hydro roller cam with up to .600" lift. they are also drilled for 1/2 head bolts, but will work on a 302 block if you use stepped bolts or bushings. these are an inline valve head, so they should work with just about any piston out there. heads come with guideplates for 5/16" pushrods, and 3/8" studs for rockers. $1200obo
![](http://i220.photobucket.com/albums/dd188/32vfoxbird/Picture088small.jpg)
![](http://i220.photobucket.com/albums/dd188/32vfoxbird/Picture092small.jpg)
rxracer at comcast dot net NE Houston 77044
one head has a weld repair that Naiser Racing Components did for a damaged spark plug hole. they did a phenomenal job on it, and pressure checked both heads afterwards. 5-angle valve job was done by B&G in Alvin. the heads were milled .030" to bring the combustion chambers to 58cc. intake ports have been matched to a 1262 gasket, and the exhaust ports will accommodate a 1-7/8" header nicely. i have no flow numbers for these, but would estimate around 280cfm at .600" lift. these would be awesome heads for a big cube windsor, or a boosted or sprayed 306/331/347. springs are good for a hydro roller cam with up to .600" lift. they are also drilled for 1/2 head bolts, but will work on a 302 block if you use stepped bolts or bushings. these are an inline valve head, so they should work with just about any piston out there. heads come with guideplates for 5/16" pushrods, and 3/8" studs for rockers. $1200obo
![](http://i220.photobucket.com/albums/dd188/32vfoxbird/Picture088small.jpg)
![](http://i220.photobucket.com/albums/dd188/32vfoxbird/Picture092small.jpg)
rxracer at comcast dot net NE Houston 77044