FS: Stage II+ LT1 Heads, CC306 Cam, R Lifters, Pushrods
09-28-2009, 03:04 PM
#1
10 Second Club
Thread Starter
iTrader: (8)
Join Date: Feb 2006
Location: Round Rock, TX
Posts: 981
Likes: 0
Received 0 Likes
on
0 Posts
FS: Stage II+ LT1 Heads, CC306 Cam, R Lifters, Pushrods I'm going to be changing my setup and have decided to sell the following. Please note that these parts are still on the car and I will start removing them very soon. Shipping is in addition to the prices below. If you have any questions, let me know.
1) Stage II+ Ported LT1 Heads Complete - $1,000
-- Intake 280 CFM @ .600/ Exhaust 186 CFM @ .600
-- 2.02/1.57 Ferrea valves
-- Comp Cams 7/16 Rocker Arm Studs (4501-16)
-- Comp Cams Valve Springs (950-16)
-- Comp Cam Steel Retainers (740-16)
-- Comp Cams Valve Spring Seats (4781-16)
-- Comp Valve Locks (613-16)
-- GM Bowtie Head Guide Plates
-- Flow sheets available by request
-- Does not include rocker arms
2) Comp Cams #07-306-8 (CC306) - SOLD
-- 230/244 duration @ 0.050
-- 0.510/0.540 lift
-- 112 LSA
3) Comp "R" Series Lifters (875-16) - SOLD
-- Approximately 4K miles
4) Comp Pushrods (7940-16) - SOLD
-- One piece chrome moly
-- 7.200" length
-- Approximately 4K miles
5) Canton LT1 Valve Covers - SOLD
-- Notched for alternator
-- Oil cap included
1) Stage II+ Ported LT1 Heads Complete - $1,000
-- Intake 280 CFM @ .600/ Exhaust 186 CFM @ .600
-- 2.02/1.57 Ferrea valves
-- Comp Cams 7/16 Rocker Arm Studs (4501-16)
-- Comp Cams Valve Springs (950-16)
-- Comp Cam Steel Retainers (740-16)
-- Comp Cams Valve Spring Seats (4781-16)
-- Comp Valve Locks (613-16)
-- GM Bowtie Head Guide Plates
-- Flow sheets available by request
-- Does not include rocker arms
2) Comp Cams #07-306-8 (CC306) - SOLD
-- 230/244 duration @ 0.050
-- 0.510/0.540 lift
-- 112 LSA
3) Comp "R" Series Lifters (875-16) - SOLD
-- Approximately 4K miles
4) Comp Pushrods (7940-16) - SOLD
-- One piece chrome moly
-- 7.200" length
-- Approximately 4K miles
5) Canton LT1 Valve Covers - SOLD
-- Notched for alternator
-- Oil cap included
Last edited by Formula383; 10-07-2009 at 03:29 PM.
Trending Topics
10-02-2009, 08:59 AM
#10
10 Second Club
Thread Starter
iTrader: (8)
Join Date: Feb 2006
Location: Round Rock, TX
Posts: 981
Likes: 0
Received 0 Likes
on
0 Posts
Heads were ported by Port Pros of Austin, TX but they are no longer in business. The heads have been flowed on 2 different benches and the numbers were very close on both so the flow sheets are accurate.
I can get you into contact with the head porter if you have questions. LMK
PM sent.
I can get you into contact with the head porter if you have questions. LMK
PM sent.
