SBC Heads, Rockers, Race Seats
10-15-2009, 09:18 PM
#1
Teching In
Thread Starter
Join Date: Jun 2007
Location: West Warwick, RI
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
SBC Heads, Rockers, Race Seats Pair of Pro-Topline 200cc cylinder heads with 64cc chambers, and straight plugs. These heads were used for approximately 10-15k miles and had no problems! They were removed due to a suspected bent valve, but upon removal were found to be perfect, and just carboned up! The new heads were already purchased so they went on and these ended up on the shelf. The heads come complete minus springs. On a 350ci engine with a decent cam and rpm intake the motor made 320hp to the tires which would be around 400 at the crank, the 3400lb car went 112 in the 1/4mi. After adding the blower the output shot to 500hp at the wheels, roughly 600+ at the crankshaft!!! Complete these cost me over $1400 when new, and are still just about perfect! $800obo plus shipping.
Proform 1.5 ratio Aluminum Roller Rockers. 3/8 Stud. Used for 5k miles. Non-self aligning. $185 from summit, sell for $120obo plus shipping.
Pair of blue suede racing bucket seats. Seats are in perfect shape other than two or three slight tears on the bottom (can NOT see when seats are installed) from moving them around. They have never even been bolted into a car! I will NOT ship these, so local pickup only.
Proform 1.5 ratio Aluminum Roller Rockers. 3/8 Stud. Used for 5k miles. Non-self aligning. $185 from summit, sell for $120obo plus shipping.
Pair of blue suede racing bucket seats. Seats are in perfect shape other than two or three slight tears on the bottom (can NOT see when seats are installed) from moving them around. They have never even been bolted into a car! I will NOT ship these, so local pickup only.
Last edited by Monte88; 10-19-2009 at 08:18 AM.
