AED 4150 950hp
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
AED "max pro" pro series carb
setup for gasoline
3 circuit!
billet annular boosters
trimmed throttle shaft
1.80 throttle blades
HP race baseplate. NO vacuum ports.
83 squared jets with rear jet extensions
30cc accelerater pumps
31 squirters.
comes with blue anodized -6AN fittings installed(not pictured)
carb has just been cleaned, flowed, and assembled by AED.
i put the carb on the car for 2 passes to insure nothing was wrong. run within 2 hundreths and .2 mph on a back to back passes.
bolt on and run, no junk!
1100 from AED
550 shipped
setup for gasoline
3 circuit!
billet annular boosters
trimmed throttle shaft
1.80 throttle blades
HP race baseplate. NO vacuum ports.
83 squared jets with rear jet extensions
30cc accelerater pumps
31 squirters.
comes with blue anodized -6AN fittings installed(not pictured)
carb has just been cleaned, flowed, and assembled by AED.
i put the carb on the car for 2 passes to insure nothing was wrong. run within 2 hundreths and .2 mph on a back to back passes.
bolt on and run, no junk!
1100 from AED
550 shipped
![](http://i102.photobucket.com/albums/m108/stage20/DSCN2446.jpg)