355 with AFR heads
12-11-2007, 12:01 PM
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Jun 2005
Location: Stillwater,Ok
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
355 with AFR heads Fresh 355 with less than 200 miles. Motor has a one piece rear main, cast crank, polished and balanced stock rods with ARP bolts, TRW forged pistons with .100 domes. motor should be 9.8 compression with the AFR heads, Weiand Team G intake port matched to heads, new 76cc AFR 210 aluminum CNC ported heads with titanium retainers, new comp Pro Magnum hydraulic roller lifters and rockers, Comp cams extreme energy hydraulic roller cam 242/246 duration, .540/.562 lift on a 110.
$2800 intake to pan
$2800 intake to pan
12-11-2007, 09:33 PM
#2
Teching In
Thread Starter
iTrader: (3)
Join Date: Jun 2005
Location: Stillwater,Ok
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
this is a link to a engine buildup that is very similiar to my engine.
http://www.superchevy.com/technical/...sts/index.html
http://www.superchevy.com/technical/...sts/index.html
Last edited by slowass10; 12-13-2007 at 07:39 PM.
