Aeromotive fuel system
12-25-2007, 09:54 PM
#1
Teching In
Thread Starter
Join Date: Sep 2003
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Aeromotive fuel system Aeromotive Billet Fuel Filter Bracket.This 2'' ID bracket was designed for fuel filters 027-12301 and 12304.
this bracket is CAD designed and CNC machined out of 6061-T6 aircraft aluminum alloy.
Fuel Filter
-10AN inlet/outlet
5'' long x 2'' diameter
10 micron replaceable element
Billet, in-line housing with -10 AN ports and hi-flow 10-micron (fine) replaceable element. Red, type II bright dip anodized. Recommended after fuel pump. 5'' long X 2'' diameter. Flows 2,000 lb/hr with a pressure drop of less than 1 PSI.
Universal Bypass Regulator
027-13301
The regulator's base pressure is adjustable from 3 to 20 psi, but the included and optional high-pressure spring can increase the range from 20 to 65 psi. When referencing boost, fuel pressure will rise on a 1:1 ratio. Unsure which spring is in this Regulator.
Aeromotive 700 HP EFI Fuel Pump 027-11106
For fuel injected applications with base pressure settings between 30 and 65 PSI. Designed to fuel anything from 150 to 700 horsepower.
Included is a -10an Elbow for the fuel tank elbow. Included is the -10an Earls fittings that can be welded to tank. A few extra misc fittings .$450.00 shipped. Efi pump only used for dyno tuned motor.
Here is a Link of the fuel system.
http://www.racingjunk.com/post/93066...el-system.html
Please Contact CaliBranden@aol.com for any information.
Thanks BrandenCali
this bracket is CAD designed and CNC machined out of 6061-T6 aircraft aluminum alloy.
Fuel Filter
-10AN inlet/outlet
5'' long x 2'' diameter
10 micron replaceable element
Billet, in-line housing with -10 AN ports and hi-flow 10-micron (fine) replaceable element. Red, type II bright dip anodized. Recommended after fuel pump. 5'' long X 2'' diameter. Flows 2,000 lb/hr with a pressure drop of less than 1 PSI.
Universal Bypass Regulator
027-13301
The regulator's base pressure is adjustable from 3 to 20 psi, but the included and optional high-pressure spring can increase the range from 20 to 65 psi. When referencing boost, fuel pressure will rise on a 1:1 ratio. Unsure which spring is in this Regulator.
Aeromotive 700 HP EFI Fuel Pump 027-11106
For fuel injected applications with base pressure settings between 30 and 65 PSI. Designed to fuel anything from 150 to 700 horsepower.
Included is a -10an Elbow for the fuel tank elbow. Included is the -10an Earls fittings that can be welded to tank. A few extra misc fittings .$450.00 shipped. Efi pump only used for dyno tuned motor.
Here is a Link of the fuel system.
http://www.racingjunk.com/post/93066...el-system.html
Please Contact CaliBranden@aol.com for any information.
Thanks BrandenCali
