turn your Gbody into a Pro-touring machine!!!
01-07-2008, 05:23 PM
#1
turn your Gbody into a Pro-touring machine!!! all these parts are off my 1980 malibu project car, they should fit any 1978-1988 g-body malibu, cutlass, regal, grand prix, le mans, etc... any questions please PM me here or email me. all items are located in Northern NJ (zip 07403). local pickup is best, but i will ship most of the items.
Baer "track" 13inch disc brake kit (front):
b-body spindles, drilled/slotted baer 13in rotors, PBR calipers, Baer pads, and braided lines. these were on the car for a little over 2 years, have about 6000 miles on them. the car stopped perfectly. asking $900obo(these were $1300 new)
BMR rear control arms:
tubular rear arms with greaseable poly bushings. $150
HOTCHKIS tubular upper a-arms(front):
for use with B-body spindles, greaseable poly bushings. $400
Monte SS front and rear sway bars:
took these off an 87 monte SS, good shape(could use a coat of paint) $100 for both
AGR quick-ratio power steering box:
6000 miles on the box, 14:1 ratio. $200
modified Gbody gas tank for EFI:
modded by Rock Valley with internal baffles, warlboro 255 pump and sending unit(local pick-up only) asking $450(paid $700 new)
G-force T56 crossmember:
for t56 six speed trans in a g-body(you will have to buy/fab a frame extension for the drivers side) $150
Gbody t56 clutch pedal:
made by John Bzdel, bolts to stock brake pedal bracket and allows use of 93-02 f-body clutch master. $100
LT1 power steering pump:
unknown mileage, worked when i pulled it off. $50
LT1 belt tensioner:
$25
LT1 style t56 slave/master:
$100
87 monte carlo wiper motor:
should fit any g-body, for intermittent wipers $30
Baer "track" 13inch disc brake kit (front):
b-body spindles, drilled/slotted baer 13in rotors, PBR calipers, Baer pads, and braided lines. these were on the car for a little over 2 years, have about 6000 miles on them. the car stopped perfectly. asking $900obo(these were $1300 new)
BMR rear control arms:
tubular rear arms with greaseable poly bushings. $150
HOTCHKIS tubular upper a-arms(front):
for use with B-body spindles, greaseable poly bushings. $400
Monte SS front and rear sway bars:
took these off an 87 monte SS, good shape(could use a coat of paint) $100 for both
AGR quick-ratio power steering box:
6000 miles on the box, 14:1 ratio. $200
modified Gbody gas tank for EFI:
modded by Rock Valley with internal baffles, warlboro 255 pump and sending unit(local pick-up only) asking $450(paid $700 new)
G-force T56 crossmember:
for t56 six speed trans in a g-body(you will have to buy/fab a frame extension for the drivers side) $150
Gbody t56 clutch pedal:
made by John Bzdel, bolts to stock brake pedal bracket and allows use of 93-02 f-body clutch master. $100
LT1 power steering pump:
unknown mileage, worked when i pulled it off. $50
LT1 belt tensioner:
$25
LT1 style t56 slave/master:
$100
87 monte carlo wiper motor:
should fit any g-body, for intermittent wipers $30
Last edited by lt4malibu; 01-10-2008 at 02:11 PM.
