non-LSX Parts For Sale SBC, LT1, V6, etc.

parts f/s LT1,sbc,cc26918,cc928,NOS 5176,car audio,springs

 
Thread Tools
 
Search this Thread
 
Old 01-10-2008, 06:19 PM
  #1  
On The Tree
Thread Starter
iTrader: (19)
 
96AZHAWK's Avatar
 
Join Date: Sep 2004
Location: Mesa, Arizona
Posts: 133
Received 0 Likes on 0 Posts

Default parts f/s LT1,sbc,cc26918,cc928,NOS 5176,car audio,springs

LT1 Comp Cams 10 degree steel retainers for 918 beehives $25

NOS used partial 5176 nitrous kit $200 - parts are used unless otherwise stated: includes -4 long line, -3? short line, new -3 short line, new NOS inline pump, solenoids, new arming switch, relay & misc wiring.

howards lt1 timing chain 94301 $50

10 gauge car audio amplifier wiring kits - generic brand (rca, speaker wire, power, ground, remote, fuse) $10

New in box Comp Cams 928 dual valve springs (not 26928's) $100 OBO

SLP Firehawk/Camaro SS eibach front spring set ~2k miles $80 OBO, these were for the Firehawk/SS cars with the optional Bilstein suspension package, lower the car about .50"-.75"

Complete set of 8 brand new JE pistons still brand new in the box. $360
Also included in the set are JE .927 pins and JE locks. There is a question about the ring sizes. The two sizes listed are because the first set of sizes is what I was told the pistons required when I purchased them. The second set of measurements is what a shop had measured them out to be. I just wanted to disclose all the information I have available for them. These are intended for use in constant higher RPM race engines from what I have researched. There is no spec sheet or anything else included in the box.

Piston Specs:
Min rod length: 5.7"
Bore: 4.020"
Comp Dist: 1.550" (with 5.7 rod will work with 3.480" or 3.500" stroke)
Rings: ? either .043, 1/16, 3.0mm OR .031,1.5mm, 2.5mm?
Weight: 448 grams
96AZHAWK is offline  
 




All times are GMT -5. The time now is 01:58 AM.