FS: Rebuilt LT1 Heads
#1
TECH Regular
Thread Starter
iTrader: (4)
Join Date: Jun 2005
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
FS: Rebuilt LT1 Heads
For Sale: Pair of LT1 heads. These are the early 10207643 castings that are better for porting. They were redone by Wayne Calvert of Dallas. Work included:
* 5 angle valve job
* milled
* new seals
* new LT4 springs
* assembled
After milling, the combustion chambers were measured to be 52 cc. Stock LT1 heads are 54 cc. With stock pistons, this will put the compression ratio around 11.0-11.2:1, depending on your head gasket choice. The LT4 springs are good to .525" of lift. These are 100% ready to bolt on and go. I have a receipt from Wayne Calvert Engines for $419 worth of work to these heads.
$450 OBO
These are currently located in College Station, TX. I would like to try and sell them local, if possible. I can ship them, but the buyer is responsible for shipping costs.
* 5 angle valve job
* milled
* new seals
* new LT4 springs
* assembled
After milling, the combustion chambers were measured to be 52 cc. Stock LT1 heads are 54 cc. With stock pistons, this will put the compression ratio around 11.0-11.2:1, depending on your head gasket choice. The LT4 springs are good to .525" of lift. These are 100% ready to bolt on and go. I have a receipt from Wayne Calvert Engines for $419 worth of work to these heads.
$450 OBO
These are currently located in College Station, TX. I would like to try and sell them local, if possible. I can ship them, but the buyer is responsible for shipping costs.