LT1,SBC,Racetronix,NOS 5176,car audio,Race Suit/belt
02-08-2008, 03:57 PM
#1
LT1,SBC,Racetronix,NOS 5176,car audio,Race Suit/belt Prices do not include shipping unless otherwise arranged. Please send pm if you have any questions or offers. Thank you.
-New in box Comp Cams 928 dual valve springs (not 26928's) $100 OBO
These are for some old school engines (not sure which applications) and here are some of the specs:
Valve Springs, Dual, 1.550 in. Outside Diameter, 354 lbs./in. Rate, 1.160 in. Coil Bind Height, Set of 16
Recommended Camshaft Style Flat tappet solid
Installed Height (in) 1.880 in.
Seat Pressure at Installed Height (lbs) 160 lbs.
Open Height (in) 1.250 in.
Open Pressure (lbs) 383 lbs.
-CAT used 4340 H-beam 5.7" SBC rods with ARP bolts $200
-Fel Pro 1004 gaskets (2) SBC 400ci $60 for set of 2
-Complete set of 8 brand new JE pistons still brand new in the box. $360
Also included in the set are JE .927 pins and JE locks. There is a question about the ring sizes. The two sizes listed are because the first set of sizes is what I was told the pistons required when I purchased them. The second set of measurements is what a shop had measured them out to be. I just wanted to disclose all the information I have available for them. These are intended for use in constant higher RPM race engines from what I have researched. There is no spec sheet or anything else included in the box.
Piston Specs:
Min rod length: 5.7"
Bore: 4.020"
Comp Dist: 1.550" (with 5.7 rod will work with 3.480" or 3.500" stroke)
Rings: ? either .043, 1/16, 3.0mm OR .031,1.5mm, 2.5mm?
Weight: 448 grams
-10 gauge car audio amplifier wiring kits - generic brand (rca, speaker wire, power, ground, remote, fuse) $10
-Rockford Fosgate 15 gauge flat speaker wire purple
$.25 per foot (up to ~200’ available) or make offer on what's left of the roll
-Lightning Audio 12 gauge double insulated speaker wire
$.25 per foot (up to ~180’ available) or make offer on what's left of the roll
-Alpine DRE-A500 Crossover Network $80 shipped
-Diamond Audio Amp D3 400.4 $120 shipped
-Rockford Fosgate Punch Series 1 2-10" Subs in Carpeted Wedge Box $100
-New in box Comp Cams 928 dual valve springs (not 26928's) $100 OBO
These are for some old school engines (not sure which applications) and here are some of the specs:
Valve Springs, Dual, 1.550 in. Outside Diameter, 354 lbs./in. Rate, 1.160 in. Coil Bind Height, Set of 16
Recommended Camshaft Style Flat tappet solid
Installed Height (in) 1.880 in.
Seat Pressure at Installed Height (lbs) 160 lbs.
Open Height (in) 1.250 in.
Open Pressure (lbs) 383 lbs.
-CAT used 4340 H-beam 5.7" SBC rods with ARP bolts $200
-Fel Pro 1004 gaskets (2) SBC 400ci $60 for set of 2
-Complete set of 8 brand new JE pistons still brand new in the box. $360
Also included in the set are JE .927 pins and JE locks. There is a question about the ring sizes. The two sizes listed are because the first set of sizes is what I was told the pistons required when I purchased them. The second set of measurements is what a shop had measured them out to be. I just wanted to disclose all the information I have available for them. These are intended for use in constant higher RPM race engines from what I have researched. There is no spec sheet or anything else included in the box.
Piston Specs:
Min rod length: 5.7"
Bore: 4.020"
Comp Dist: 1.550" (with 5.7 rod will work with 3.480" or 3.500" stroke)
Rings: ? either .043, 1/16, 3.0mm OR .031,1.5mm, 2.5mm?
Weight: 448 grams
-10 gauge car audio amplifier wiring kits - generic brand (rca, speaker wire, power, ground, remote, fuse) $10
-Rockford Fosgate 15 gauge flat speaker wire purple
$.25 per foot (up to ~200’ available) or make offer on what's left of the roll
-Lightning Audio 12 gauge double insulated speaker wire
$.25 per foot (up to ~180’ available) or make offer on what's left of the roll
-Alpine DRE-A500 Crossover Network $80 shipped
-Diamond Audio Amp D3 400.4 $120 shipped
-Rockford Fosgate Punch Series 1 2-10" Subs in Carpeted Wedge Box $100
Last edited by 96AZHAWK; 03-16-2008 at 01:15 AM.
