FS: Complete LT1 swap
07-13-2008, 09:46 PM
#1
Staging Lane
Thread Starter
Join Date: Feb 2006
Location: Ringgold, GA
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
FS: Complete LT1 swap Im going to swap an LS in the third gen so the LT1 and all related parts need to go.
-Complete 93' speed density LT1 with computer (approx 125,xxx miles)
-Painless wiring harness (still labeled with painless wiring labels)
-93' 4L60 built with a Probuilt Automatics street/strip kit
-Vigilante 3200 stall converter
-External trans cooler with hoses
-93' Camaro radiator with dual fan setup
-Ceramic coated shorties or LT's, buyers choice I have both.
-A/C relocation bracket to move compressor from bottom passenger side to top of drivers side.
-MSD billet Optispark, approximately 7 months old but is having issues so I'm going to try and send it to them and have them warranty it.
-Brand new set of MSD wires are included still in the box.
-Steel braided fuel lines with AN fittings and quick disconnects. Made for 3rd gen f bod. goes from stock hard lines to LT1 fuel rails.
Asking price is $2500 for everything. I have way more than that in it and receipts to go with it. The engine is still in the car for now so test rides are welcome for serious buyers.
These are old pics but I'm gonna tray and get some more current ones tomorrow.
-Complete 93' speed density LT1 with computer (approx 125,xxx miles)
-Painless wiring harness (still labeled with painless wiring labels)
-93' 4L60 built with a Probuilt Automatics street/strip kit
-Vigilante 3200 stall converter
-External trans cooler with hoses
-93' Camaro radiator with dual fan setup
-Ceramic coated shorties or LT's, buyers choice I have both.
-A/C relocation bracket to move compressor from bottom passenger side to top of drivers side.
-MSD billet Optispark, approximately 7 months old but is having issues so I'm going to try and send it to them and have them warranty it.
-Brand new set of MSD wires are included still in the box.
-Steel braided fuel lines with AN fittings and quick disconnects. Made for 3rd gen f bod. goes from stock hard lines to LT1 fuel rails.
Asking price is $2500 for everything. I have way more than that in it and receipts to go with it. The engine is still in the car for now so test rides are welcome for serious buyers.
These are old pics but I'm gonna tray and get some more current ones tomorrow.
07-14-2008, 10:54 PM
#4
Staging Lane
Thread Starter
Join Date: Feb 2006
Location: Ringgold, GA
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
The Longtubes ar hedman headers but they are for a 3rd gen and won't fit your 4th gen.
Maybe for the right price. I receipts somewhere for all the parts. The kit and stall cost around $1300 and the stall is still under warranty.
Maybe for the right price. I receipts somewhere for all the parts. The kit and stall cost around $1300 and the stall is still under warranty.
