96AZHAWK

iTrader: (19)

The following parts are all BRAND NEW except for the few that are labeled as used, they have been mocked up to begin project. I would like to get commitments on the long block items before letting any small pieces go. I can supply pictures but some of the parts are with the engine builder at least until the weekend. I guarantee that the new parts are in fact new parts. Let me know if you have any questions. Shipping is not included in any of the parts. Thank you.

$450-Eagle 4340 forged crank 3.500" stroke, 1 piece rear main seal part# 43533505700 *pending to Pyrodawg*

$450-Manley 4340 H beam rods 5.7" part# 14050-8 *pending to Pyrodawg*
http://i282.photobucket.com/albums/k...t/Manley-1.jpg

$450-Ross Racing pistons part# 94455 4.020", for 5.7” rod, 3.48/3.50 stroke
http://i282.photobucket.com/albums/k...out/Ross-1.jpg
http://i282.photobucket.com/albums/k...out/Ross-2.jpg

$100-Total Seal plasma moly rings part# CR9090-25, 4.025 file fit

$1200-rotating assembly package (Eagle crank, Manly rods, Ross Pistons, Total seal plasma moly rings)

$800-NEW GM 4 bolt ARP studded block with Clevite cam bearings and Clevite main bearings. Torque plate, line honed, bored .020 over, clearanced for stroker. This is a new block, never been used, all machine work done. Part# 10125327 *pending to Pyrodawg*
http://i282.photobucket.com/albums/k...ut/block-1.jpg
http://i282.photobucket.com/albums/k...ut/block-2.jpg
http://i282.photobucket.com/albums/k...ut/block-3.jpg
http://i282.photobucket.com/albums/k...ut/block-4.jpg
http://i282.photobucket.com/albums/k...ut/block-5.jpg
http://i282.photobucket.com/albums/k...ut/block-6.jpg
http://i282.photobucket.com/albums/k...ut/block-7.jpg
http://i282.photobucket.com/albums/k...ut/block-8.jpg
http://i282.photobucket.com/albums/k...ut/block-9.jpg
http://i282.photobucket.com/albums/k...t/block-10.jpg
http://i282.photobucket.com/albums/k...t/block-11.jpg
http://i282.photobucket.com/albums/k...t/block-14.jpg
http://i282.photobucket.com/albums/k...t/block-15.jpg

$2100-AFR LT4 195 heads ported by Lloyd Elliott (2.02,1.60 valves, 26928 springs good for .625/.650 lift, 10 degree Comp Cams Titanium retainers, Isky adjustable guideplates, ARP 7/16 studs) zero miles since being ported and I also had a local shop double check everything when I had the springs and titanium retainers changed out. Castings and valves are used but checked out to be in good shape, springs & retainers are brand new.

Flow numbers:
.200/.144/.105
.300/.198/.144
.400/.242/.177
.500/.271/.201
.550/.279/.209
.600/.285/.214
.650/.284/.218

$500-NEW never installed LT4 intake ported by Joe Overton

$350-BRE custom cam for matched for this combo, AFR heads, ported intake, 1.6 rockers street drivability

$2700-LT4 Top End Package (Heads, Intake, cam, intake gaskets, head gaskets)

$75 shipped-used 7.150 1 piece chromoly pushrods .065 wall
http://i282.photobucket.com/albums/k...t/pushrods.jpg

$230-Comp Cams Pro Magnum NSA 1.6 rockers 1305-16
http://i282.photobucket.com/albums/k.../1305-16-1.jpg
http://i282.photobucket.com/albums/k.../1305-16-1.jpg

$200-Used Canton 242T 7qt oil pan also have new FelPro blue gasket that I can include for $20 more. *pending to LT1 POWR*

$40-New GM oil pump including higher pressure white spring part# 12555283
http://i282.photobucket.com/albums/k...moilpump-1.jpg
http://i282.photobucket.com/albums/k...moilpump-2.jpg

$35-New GM oil pickup part# 12550042
http://i282.photobucket.com/albums/k...ilpickup-1.jpg
http://i282.photobucket.com/albums/k...ilpickup-2.jpg

$60-New GM factory timing chain
http://i282.photobucket.com/albums/k...ut/GMchain.jpg

$175-New Meziere electric WP118

$300-Like new ATI super dampner balance/pulley (looks like it was never bolted up, but I am not 100% sure) *pending to LT1 POWR*
http://i282.photobucket.com/albums/k...0out/ATI-1.jpg
http://i282.photobucket.com/albums/k...0out/ATI-2.jpg
http://i282.photobucket.com/albums/k...0out/ATI-3.jpg
http://i282.photobucket.com/albums/k...0out/ATI-4.jpg

-$75 shipped - SBC/LT1 Piston ring set - Total Seal plasma moly - $75 shipped. This is a brand new set of piston rings that I had picked up but then I changed my setup and needed to get the correct size rings. These are brand new in the box for standard bore 4.005”, part #CR9090-5, plasma moly, ring sizes are 5/64, 5/64, 3/16 and are file fit. These are $99 on Summit so you can save $25 bucks on these.
http://i282.photobucket.com/albums/k...s/DSC09276.jpg

-$30 shipped - SBC/LT1 Piston ring set - Speed Pro moly, ring sizes are 5/64, 5/64, 3/16- $30 shipped
http://i282.photobucket.com/albums/k.../SPE251K20.jpg

96AZHAWK

iTrader: (19)

Sunday bump.