1969 Chevelle SS 4SPD Body
09-18-2008, 04:54 PM
#1
1969 Chevelle SS 4SPD Body http://cgi.ebay.com/ebaymotors/ws/eB...m=110290198199
1969 Chevelle SS 4SPD Body- Frame boxed and powdercoated Satin Black as well as bumper brackets, hood hinges, etc... Full Hotchkiss suspension with Global West lowers, Baer 13" brakes, In-Line Tube stainless brake lines and Goodrich braided to wheels and diff. Moser 12 bolt, (moly tubes, 33 splined axles, 3.150" bearings and ends, 800lb springs, and C/F clutches, with 1350 yoke, TA aluminum cover), Detroit Speed Saginaw 600 12.7-1 PS box, coated with Pure Choice 3500lb PS hose with fittings, GM full quarters, front fenders, front grill, headlight bezels, door chrome, Dynacorn doors and trunk, PUI wheel well, rear window, windshield, chrome as well as original in good shape. OPG marker lights with bezels, front and rear turn signal lights with bezel chrome, mirrors, inner plastic fenders with staples and rubbers, radiator support, new gas tank with straps and rubbers and GM cap, bumpers, A&M Softseal master kit, Detroit Speed wiper motor, (lightweight), Moog steering parts, Billett Specialties GTX01 17X8" fronts and 17X10" rears on Nitto 455 rubber. QA1 adjustable shocks, Energy Suspension urethane body mount kit with new cones, so much more. This is a body man's dream. well over $40,000.00 + labor. $20,000.00. Go to link for pictures.
Also have-- New 540 10.6-1, call for details, all the goodies-9800.00, can deliver for cost of gas.
PST aluminum driveshaft w/1350 joints and 400 yoke-400.00 shipped.
Griffin 2 row 1 1/4" tubes-350.00 shipped.
Aeromotive master fuel kit, (carb) with cycling computer-1100.00 shipped.
Flex-Lite Extreme electric fan kit-200.00 shipped.
Lemmons 2 1/8" to 2 1/4"X4" stepped race hedders, coated, all inside the wheelwell and tucked close to the floor, custom made-1500.00 shipped.
Flow Tech 3.5" mandrel bent full exhaust with 3.5" Flowmaster mufflers with all stainless band clamps-675.00 shipped.
MSD 7AL2 with crank trigger, distributor with steel gear, & HVC coil-700.00 shipped.
231-218-4901-Brian.
1969 Chevelle SS 4SPD Body- Frame boxed and powdercoated Satin Black as well as bumper brackets, hood hinges, etc... Full Hotchkiss suspension with Global West lowers, Baer 13" brakes, In-Line Tube stainless brake lines and Goodrich braided to wheels and diff. Moser 12 bolt, (moly tubes, 33 splined axles, 3.150" bearings and ends, 800lb springs, and C/F clutches, with 1350 yoke, TA aluminum cover), Detroit Speed Saginaw 600 12.7-1 PS box, coated with Pure Choice 3500lb PS hose with fittings, GM full quarters, front fenders, front grill, headlight bezels, door chrome, Dynacorn doors and trunk, PUI wheel well, rear window, windshield, chrome as well as original in good shape. OPG marker lights with bezels, front and rear turn signal lights with bezel chrome, mirrors, inner plastic fenders with staples and rubbers, radiator support, new gas tank with straps and rubbers and GM cap, bumpers, A&M Softseal master kit, Detroit Speed wiper motor, (lightweight), Moog steering parts, Billett Specialties GTX01 17X8" fronts and 17X10" rears on Nitto 455 rubber. QA1 adjustable shocks, Energy Suspension urethane body mount kit with new cones, so much more. This is a body man's dream. well over $40,000.00 + labor. $20,000.00. Go to link for pictures.
Also have-- New 540 10.6-1, call for details, all the goodies-9800.00, can deliver for cost of gas.
PST aluminum driveshaft w/1350 joints and 400 yoke-400.00 shipped.
Griffin 2 row 1 1/4" tubes-350.00 shipped.
Aeromotive master fuel kit, (carb) with cycling computer-1100.00 shipped.
Flex-Lite Extreme electric fan kit-200.00 shipped.
Lemmons 2 1/8" to 2 1/4"X4" stepped race hedders, coated, all inside the wheelwell and tucked close to the floor, custom made-1500.00 shipped.
Flow Tech 3.5" mandrel bent full exhaust with 3.5" Flowmaster mufflers with all stainless band clamps-675.00 shipped.
MSD 7AL2 with crank trigger, distributor with steel gear, & HVC coil-700.00 shipped.
231-218-4901-Brian.
Last edited by 382ssz28; 09-18-2008 at 05:00 PM.
