badass99ss

iTrader: (17)

Hey guys,

Looking for a tuner to do a SD tune on my 1969 Camaro in WA. It's a forged LS2 402/T56 combo. Will be runing a F1a unit,TFS 220cc heads,Blower cam,Victor jr/6061 elbow intake combo,90mm tb,80lb injectors, and Kooks 1 7/8 headers. Willing to do some traveling to get it done. Need a street tune and some dyno time. The previous tuner(Sponsor) I was using for my 99 SS does not feel comfortable doing a SD.

Thanks
Troy

Rockin C Racing

iTrader: (3)

Talk to Wong at Wong's Performance here in Vancouver, Wa. He can do speed density tuning.

smokinponcho73

iTrader: (6)

Yeah I would talk to Tom wong, that will be a cool build when its all finished. Makr sure to post some videos of it.

mcdonald77

iTrader: (21)

you also have Ellis at speed secrets in Monroe, WA

badass99ss

iTrader: (17)

Spoke to Ellis today, excited to get this car on the road.


Troy

Spectre86

iTrader: (42)

+1 for Tom at Wong Performance. He tuned my 427

98goldz28

iTrader: (4)

Tom Wong did my tune, worth every penny

02sslayer

iTrader: (4)

i actually talked to wong about doing a speed density when i got my car tuned and he was not 100% comfortable doing them either, which is why i am not running one

AgFormula02

iTrader: (13)

Custom 2 or 3 bar tune needed based on the blower potential If the person you talk to does not know what you are talking about, run away. Fast.

ScarabEpic22

iTrader: (1)

You can tune it with a MAF IF you use a new style LS3/7 MAF and use a large enough diameter intake pipe so you don't hit the 512g/s limit in the PCM (Im assuming its an LS1 PCM, but same goes for E40 and early E38/E67s).

Im tune in Seattle as well, but I dont have a dyno so I rent dyno time from other shops.

Good luck with your build, post back with some #s when you get it running.

runsfromdacops

i used TTI for my 900hp tune and am very happy with it..