6.0 iron block
02-08-2005, 03:46 PM
#2
TECH Addict
iTrader: (4)
Join Date: Feb 2002
Location: Enumclaw, WA
Posts: 2,566
Likes: 0
Received 0 Likes
on
0 Posts
From me!
Looking for $375 now. Let me know if you wanna swing by my place in Kent or meet somewhere to see it.
Jason,
206.999.3734
ls1plourdo@hotmail.com
Looking for $375 now. Let me know if you wanna swing by my place in Kent or meet somewhere to see it.
Jason,
206.999.3734
ls1plourdo@hotmail.com
02-08-2005, 05:20 PM
#5
You said you might be taking your nitrous kit off in April, right? I may be interested in it around that time, as its looking more and more like I won't buy a kit in the next couple of months... you'll have to give me a breakdown of what all you have in the kit, what you're parting with, and how much you're looking to get for the whole thing. Might be time to inject some giggle juice... 
02-08-2005, 10:00 PM
#6
10 Second Club
Thread Starter
well lets see jason, it will come with new fuel rails, the nitrous nozels that sit under the injectors, all the tubes, jets for 80, 100, 150, 180. one ten pund bottle and the accumulator, and a throttle switch. you will need a window switch, some wiring and some conectors. basicly the whole kit as i got it. I might even throw in the purge silinoid. Nothing is wrong with the kit except a few scratches on the rails, from intall and remoal, in fact the silinoids were just rebuilt by nitrous dave. i would probely let it go for about 950$ give or take. If you want will part with it much sooner.
Trending Topics
02-09-2005, 01:31 AM
#8
Originally Posted by sardog46
well lets see jason, it will come with new fuel rails, the nitrous nozels that sit under the injectors, all the tubes, jets for 80, 100, 150, 180. one ten pund bottle and the accumulator, and a throttle switch. you will need a window switch, some wiring and some conectors. basicly the whole kit as i got it. I might even throw in the purge silinoid. Nothing is wrong with the kit except a few scratches on the rails, from intall and remoal, in fact the silinoids were just rebuilt by nitrous dave. i would probely let it go for about 950$ give or take. If you want will part with it much sooner.
So this is which wet kit? TNT? NX? Nitrous Dave's?Nitrous is just one of the things I have on the plate at this point, so I'll have to see exactly where the budget is once I get my tax return (hopefully in the next two or three weeks)... so no rush, take your time.
02-09-2005, 01:38 AM
#9
12 Second Club
Join Date: Jul 2004
Location: Lynnwood, WA
Posts: 2,923
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tranzor_Z28
That's quite a bit of stuff you got there! So this is which wet kit? TNT? NX? Nitrous Dave's?
Nitrous is just one of the things I have on the plate at this point, so I'll have to see exactly where the budget is once I get my tax return (hopefully in the next two or three weeks)... so no rush, take your time.
So this is which wet kit? TNT? NX? Nitrous Dave's?Nitrous is just one of the things I have on the plate at this point, so I'll have to see exactly where the budget is once I get my tax return (hopefully in the next two or three weeks)... so no rush, take your time.
02-09-2005, 09:35 AM
#10
10 Second Club
Thread Starter
yhea rookie's right, its the nxl kit from nitrous express. Direct port, as it piggbacks each injector,
Poik-i will tell you that this will be a high spinnin son of a bitch, big, living on high octane, and probely have just a little shot on it
Poik-i will tell you that this will be a high spinnin son of a bitch, big, living on high octane, and probely have just a little shot on it
02-09-2005, 10:47 PM
#15
10 Second Club
Thread Starter
details......well it will be a 408 solid roller with some spray, as far as sepcifics well that will be between me and the garage floor, and mybee dennis 
02-10-2005, 08:14 AM
#16
10 Second Club
iTrader: (4)
Join Date: Feb 2004
Location: Marysville, WA
Posts: 9,448
Likes: 0
Received 0 Likes
on
0 Posts
I wish I had your gumption Jason. You one crazy sob dude....I love it! 
Have you thought about topping it off with an LSX 90 or a sheet metal intake? Your stock manifold is going to be a choke point on that much motor. Let me know if you need any help when the fun begins.
Have you thought about topping it off with an LSX 90 or a sheet metal intake? Your stock manifold is going to be a choke point on that much motor. Let me know if you need any help when the fun begins.
02-10-2005, 10:59 AM
#18
10 Second Club
iTrader: (4)
Join Date: Feb 2004
Location: Marysville, WA
Posts: 9,448
Likes: 0
Received 0 Likes
on
0 Posts
What's with all these "connections", were you part of the Florida Street Racer's Mafia or something? Oh wait, you can tell me but then you'll have to tell Guido to come kill me.....never mind. 
02-10-2005, 11:33 AM
#19
10 Second Club
Thread Starter
Just watch yourself walking down dark allay ways in the near future. No so much the street racing game, and their not all my contacts, lot of them are shawns. he will be bringing back some new toys with him