Coil Relocation Kit Info
Originally Posted by 99blancoSS
Just when I think I'm out some asscake drags me back in. Many people still clean plugs today. If you can afford to buy them at whim then good for you. Your asinine list of examples isn’t even worth going into. Modding a car isn’t in the same category and you have no idea of the wear on my shifter. Some people cant afford to change their plugs pre-maturely and disseminating information that isn’t true is just plain ignorant. IF there is a practical reason for doing something then great, I was trying to ascertain that fact on the relocation kit.. You think because you can afford an fbody it means you can just **** money away? LMAO!! Any money saved is money earned, not my fault if you like to waste resources, just don’t call it necessary cause its not, its just pissing money away because you can, big ******* deal. This topic was dead until your late lame *** jumped back in and started again.
And no your not in my world.
And no your not in my world.
If you care to take some friendly advice, relax, chill out a bit and don't take things so personally. Try to take a different perspective before posting. You have to remember that most of these guys you are interacting with have been on this section for a long time (years). Then you come on here with your opinions that come accross as if it has to be done your way or no way, then it's going to ruffle a few feathers and they are not going to just stand back and let it happen.
Just my .02
Mike
Thread Starter
10 Second Club
iTrader: (4)
Joined: Feb 2004
Posts: 9,448
Likes: 0
From: Marysville, WA
I just sent 3 pics of the valve covers & coil relocation packs to Josh to have him post them for me. I can't shrink pics from my digi cam down small enough & the video cam pics are crap. So hopefully in a short time you will see the fruits of my latest labor. Let me know what you think....
Originally Posted by WAHUSKER
I just sent 3 pics of the valve covers & coil relocation packs to Josh to have him post them for me. I can't shrink pics from my digi cam down small enough & the video cam pics are crap. So hopefully in a short time you will see the fruits of my latest labor. Let me know what you think....
JUST give us the big ones, my 19 inch LCD could use a good screen saver
Thread Starter
10 Second Club
iTrader: (4)
Joined: Feb 2004
Posts: 9,448
Likes: 0
From: Marysville, WA
Thanks! I was worried about the temps too Bobby. But last night I felt mine & compared them to Ricks that are mounted all stock after we drove for 10 miles & they felt just a little cooler. Maybe the headers put off more heat than the radiator?
And it doesn't like much like an LS1 anymore, huh Chris? Which is kinda what I was after. I wanted an old school, dart motor look. Pretty close IMO. BUt like you said, what a major PITA those valve covers are!!! I think I will have to pull the pass side to change plugs. So from that perspective, having to remove the coil packs is easy.
And it doesn't like much like an LS1 anymore, huh Chris? Which is kinda what I was after. I wanted an old school, dart motor look. Pretty close IMO. BUt like you said, what a major PITA those valve covers are!!! I think I will have to pull the pass side to change plugs. So from that perspective, having to remove the coil packs is easy.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Thread Starter
10 Second Club
iTrader: (4)
Joined: Feb 2004
Posts: 9,448
Likes: 0
From: Marysville, WA
Why thank you! I can hook you up with the sponsor if you are interested in buying a set. 
I will post more pics when I get my coil packs mounted with the covers I have in mind.
I will post more pics when I get my coil packs mounted with the covers I have in mind.
Originally Posted by Nasty N8
Those are some good looking valve covers 
Nate
Nate
Just wondering when he'll have to start placing traffic cones around the car when he parks with all the attention he'll get
Great work and it looks absolutly incrediable. I can not wait and see it in person. 
