Stroker Blower Issues
Thread Starter
10 Second Club
iTrader: (4)
Joined: Feb 2004
Posts: 9,448
Likes: 0
From: Marysville, WA
Stroker Blower Issues Some of you have seen / heard about some issues I've been working thru on this little project. So I thought I'd post a few pics that show exactly what is going on, the progress we've made, and the newest issue I found yesterday.
So, here are some pics of the missing hole issue on a 6L motor, the blower mounted on the engine (does that baby stick out there or what?) and the pulley allignment issue I found. Ah, the things they don't tell you......
PS Thanks to Don, Ellis & Ryan for getting me this far!
So, here are some pics of the missing hole issue on a 6L motor, the blower mounted on the engine (does that baby stick out there or what?) and the pulley allignment issue I found. Ah, the things they don't tell you......
PS Thanks to Don, Ellis & Ryan for getting me this far!
Originally Posted by WAHUSKER
Ah, the things they don't tell you......
I feel your pain. The devils in the details. "Sure its a bolt on. After its been to the machinist twice and you get 3 different brackets fabbed up for it, it will bolt right on".
You would THINK that they would have AT LEAST made you aware of the pulley alignment issue. Whats the plan for fixing that?
Thread Starter
10 Second Club
iTrader: (4)
Joined: Feb 2004
Posts: 9,448
Likes: 0
From: Marysville, WA
Oh, and thanks to Boyce for loaning me his Alt & bracket to check this out!
I am about to call ATI to see what they have to make this work. I figure they should have pulleys that bolt onto the aftermarket balancers. Surely I am not the first person to use this combination......
I am about to call ATI to see what they have to make this work. I figure they should have pulleys that bolt onto the aftermarket balancers. Surely I am not the first person to use this combination......
I hate it when "bolt ons" don't just bolt on. I mean yeah, if I'm doing something custom, I know going into it that its going to take me some time/fab work/trouble shooting and all that, but a bolt on should be simple.
A few weeks ago I put an adjustable fuel pressure regulator on my TPI engine in my truck. I had to take the upper plenum off 3 times cause the stupid bold in the AFPR was too long...and the whole thing was made specifically for this engine. It was rather annoying.
Good luck with the install! That thing is going to be a beast.
A few weeks ago I put an adjustable fuel pressure regulator on my TPI engine in my truck. I had to take the upper plenum off 3 times cause the stupid bold in the AFPR was too long...and the whole thing was made specifically for this engine. It was rather annoying.
Good luck with the install! That thing is going to be a beast.
Thread Starter
10 Second Club
iTrader: (4)
Joined: Feb 2004
Posts: 9,448
Likes: 0
From: Marysville, WA
I just talked to ATI. Amazing, they had a solution. I now am the proud owner of an 8 rib pulley setup that will work with what I have. (I wanted an 8 rib setup anyway) And it 'only' cost me $350. So much for getting in on the N02 system deal. But the good news is it should give me around 10psi!!! 
Now I need to go pimp all my 6 rib pulleys.
Now I need to go pimp all my 6 rib pulleys.
Even the mighty Radix had a few small issues, things not noted in the instructions, things that changed between 03 and 04 H2's, etc. I took note of all of them and emialed them in to Magnuson for a "free t-shirt" that I never got. It wasn't worth the trouble of documentation in my opinion. Last time I looked, they hadn't updated any of the instructions, either.
This is just par for the course. Magnuson has taken care of other issues, though, and replaced the one item that failed on mine. just no free t-shirts... LOL Sounds like ATI did the same for you and gave you a good deal on the upgrade items. Can't complain too much about that.
This is just par for the course. Magnuson has taken care of other issues, though, and replaced the one item that failed on mine. just no free t-shirts... LOL Sounds like ATI did the same for you and gave you a good deal on the upgrade items. Can't complain too much about that.
Trending Topics
Thread Starter
10 Second Club
iTrader: (4)
Joined: Feb 2004
Posts: 9,448
Likes: 0
From: Marysville, WA
Tis true, if it runs anywhere near where yours did this year, it will all be worth it! And any project like this is bound to have 'opportunites'. I wasn't trying to whine, just sharing the experience. I still can't believe all the suppliers I talked to that have never heard about any of this. Everyone must be strapping turbos onto their truck motors! 
It certainly could be worse. Just think how much fun I'd be having if you hadn't told me about this bolt hole Ryan! I wouldn't have found any of this until after the motor was in the car.....
It certainly could be worse. Just think how much fun I'd be having if you hadn't told me about this bolt hole Ryan! I wouldn't have found any of this until after the motor was in the car.....
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by WAHUSKER
... I still can't believe all the suppliers I talked to that have never heard about any of this...
Thread Starter
10 Second Club
iTrader: (4)
Joined: Feb 2004
Posts: 9,448
Likes: 0
From: Marysville, WA
Originally Posted by CHarris
Never heard or don't care? Hmmm.... I wonder sometimes!
I really hope this starts to become more smooth for you. Road bumps kinda suck. You want it to go smooth, but it rarely does. 
I can't wait to see that thing come alive...........
And thanks for sharing the pics and your experiences.
I can't wait to see that thing come alive...........And thanks for sharing the pics and your experiences.
10 Second Club
Joined: Mar 2004
Posts: 1,491
Likes: 1
From: norfolk va
You will get it together Mark, I would realy like to see that thing compete for a top spot next year. I know how this stuff goes, evrything I buy now has to be fit and made to work. Just the way it is with race parts 
Thread Starter
10 Second Club
iTrader: (4)
Joined: Feb 2004
Posts: 9,448
Likes: 0
From: Marysville, WA
Thanks for your responses Bob! You seem to be one of the few sponsors on here that knows what is required to make this setup work. I do have the ATI balancer....
And you are right Jason, this is how building a 'race car' seems to go. I guess I've been out of the game too long since I was surprised when all my hi-perf goodies didn't just bolt together. Looking forward, I am sure there will be more bumps in the road (like getting my Mez water pump & FAT BeCool radiator to fit with this blower). I just need to remember that this is fun, not a PITA.
And I'm sorry Dougie, but I will still be using my idler......different belt.
And you are right Jason, this is how building a 'race car' seems to go. I guess I've been out of the game too long since I was surprised when all my hi-perf goodies didn't just bolt together. Looking forward, I am sure there will be more bumps in the road (like getting my Mez water pump & FAT BeCool radiator to fit with this blower). I just need to remember that this is fun, not a PITA.
And I'm sorry Dougie, but I will still be using my idler......different belt.
My Mantra seems to go like this....
"F#ck, SH*T, Godd^mn, Son of a B!tch, Motherf@cker!... I hate this sh*t!"
I don't really throw tools, but Jim always thinks I'm about to
The reality is that if this stuf was that easy... everybody would be doing it. But driving stock vehicles is for other people- not me.
"F#ck, SH*T, Godd^mn, Son of a B!tch, Motherf@cker!... I hate this sh*t!"
I don't really throw tools, but Jim always thinks I'm about to
The reality is that if this stuf was that easy... everybody would be doing it. But driving stock vehicles is for other people- not me.