Seattle Area
Seattle Area Anyone in the Seattle area willing to help a newbie stuff a longblock in a SS for some fairly short cash ? hate to beg but I am in a WAY hard spot, my motors banging, gotta start a job in Renton the 16th .. I can get a motor from Cammin BeaSSt for about 1800 delivered. that leaves me 500-700 ..
Not enough, most places are askin 1500 for R&R.. I am so very stressed..
I will pay you all I have after fluids and all the beer you want etc.
If anyone is feeling generous, I am in dire straights
Not enough, most places are askin 1500 for R&R.. I am so very stressed..
I will pay you all I have after fluids and all the beer you want etc.
If anyone is feeling generous, I am in dire straights
Thanks for posting anyhow, somehow, just having a response makes me feel a bit better.. I live in Mill Creek. I know Ellis can do it, but I lack the full 1500 he needs for the job ( I know its a major hassle, rated for 21 hours I am told)
Seems I can afford to either buy / repair my engine or have it R&R'd LoL just not both..Oh well, I will keep faith that God or providence will find a way.
The thought of letting my car go and picking up a cheapo isnt all that entertaining..
I tried to get a personal loan for the repair, but with my wife out of work, I am buried in debt, rent , two cars, insurance and whatnot, I even mentioned that I may have to have them repo it, seems they would rather do that then lend me 2 k
Damn bean counters
Cammin has a motor so I could just swap em out sorta, or I can pay Ellis to yank it and pray I can repair a lower end knock and Ellis says some rocker noise/ pushrods for 700 ? <sweats> I so wish I didnt have to have this done in 3 weeks or less
If anyone reads this, please, give me your thoughts, I assure you I am open to options
Seems I can afford to either buy / repair my engine or have it R&R'd LoL just not both..Oh well, I will keep faith that God or providence will find a way.
The thought of letting my car go and picking up a cheapo isnt all that entertaining..
I tried to get a personal loan for the repair, but with my wife out of work, I am buried in debt, rent , two cars, insurance and whatnot, I even mentioned that I may have to have them repo it, seems they would rather do that then lend me 2 k
Damn bean countersCammin has a motor so I could just swap em out sorta, or I can pay Ellis to yank it and pray I can repair a lower end knock and Ellis says some rocker noise/ pushrods for 700 ? <sweats> I so wish I didnt have to have this done in 3 weeks or less
If anyone reads this, please, give me your thoughts, I assure you I am open to options
TECH Veteran
iTrader: (3)
Joined: Feb 2004
Posts: 4,729
Likes: 0
From: Lynnwood, WA (North of Seattle)
I wish I could offer some help but I have never done anything remotely close to what you need and would be more of a hinderence than a help.
I will keep a good thought for you that this all works out though.
I will keep a good thought for you that this all works out though.
Man that sucks dude. I've been in a situation like that before and it's not a fun place to be.
You could always pick up a used 5.3L off ebay for like 4-500 bucks and use the 5.3L longblock as a cheap alternative. You'd lose a bit a power but at least you could keep your wheels until you get back on your feet. You don't want a charge-off on your credit record!! Just offering another option for ya. ??
Good luck man,
Mike
You could always pick up a used 5.3L off ebay for like 4-500 bucks and use the 5.3L longblock as a cheap alternative. You'd lose a bit a power but at least you could keep your wheels until you get back on your feet. You don't want a charge-off on your credit record!! Just offering another option for ya. ??
Good luck man,
Mike
Thanks for the thoughts guys, and no, I don't want a repo, and I want to lose my SS even less, will have to think on the 5.3 thing, a bud at work says he can hook up me up w/ 90 Accord lxi w 100k on it for 2 grand..
I think that may be my option, just park the SS somewhere an hope later on this year I can save the cash, damn it LoL What's REALLY kicking my *** is that I Just put new tires : 800, Black Halo's : 170, SFC's and STB : 400 (with welding) some misc. items for about 200 TTop Shades, new remote, new wiring for my amps....That would have been enough, saved all season for it .. sorta funny in a *I may break into tears* way.
I think that may be my option, just park the SS somewhere an hope later on this year I can save the cash, damn it LoL What's REALLY kicking my *** is that I Just put new tires : 800, Black Halo's : 170, SFC's and STB : 400 (with welding) some misc. items for about 200 TTop Shades, new remote, new wiring for my amps....That would have been enough, saved all season for it .. sorta funny in a *I may break into tears* way.
Trending Topics
TECH Regular
Joined: Apr 2005
Posts: 415
Likes: 0
From: Bothell, WA
Originally Posted by Rottluver
I wish I could offer some help but I have never done anything remotely close to what you need and would be more of a hinderence than a help.
I will keep a good thought for you that this all works out though.
I will keep a good thought for you that this all works out though.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Man, I thank you all for the nice responses, I THINK I may have somethin worked out with Ellis...Mebbe, if not, then I will PM each of you and yes, I have tools, just not many, and no air tools ...I have a house garage I can use, and if no cherry picker is about, I can buy one, but this may all be for naught if the plan comes together with Speed Secrets an Rolling, only God and Providence will say..
On the other hand, I would be honored if I could buy you guys a round for extending the offer to help, means alot, I am far far from my home here and have no buds or support group... gets feeling dicey if that makes any sense to ya
So. Pick a night, Pick a bar, I get ya all a round... Just needs to be after I get my car done / back and I live right across from the Mill Creek Town offices sorta )
Yay me
...I have a house garage I can use, and if no cherry picker is about, I can buy one, but this may all be for naught if the plan comes together with Speed Secrets an Rolling, only God and Providence will say..On the other hand, I would be honored if I could buy you guys a round for extending the offer to help, means alot, I am far far from my home here and have no buds or support group... gets feeling dicey if that makes any sense to ya
So. Pick a night, Pick a bar, I get ya all a round... Just needs to be after I get my car done / back and I live right across from the Mill Creek Town offices sorta )
Yay me
TECH Veteran
iTrader: (3)
Joined: Feb 2004
Posts: 4,729
Likes: 0
From: Lynnwood, WA (North of Seattle)
Originally Posted by 01T-TopToy
Man, I thank you all for the nice responses, I THINK I may have somethin worked out with Ellis...Mebbe, if not, then I will PM each of you and yes, I have tools, just not many, and no air tools ...I have a house garage I can use, and if no cherry picker is about, I can buy one, but this may all be for naught if the plan comes together with Speed Secrets an Rolling, only God and Providence will say..
On the other hand, I would be honored if I could buy you guys a round for extending the offer to help, means alot, I am far far from my home here and have no buds or support group... gets feeling dicey if that makes any sense to ya
So. Pick a night, Pick a bar, I get ya all a round... Just needs to be after I get my car done / back and I live right across from the Mill Creek Town offices sorta )
Yay me
...I have a house garage I can use, and if no cherry picker is about, I can buy one, but this may all be for naught if the plan comes together with Speed Secrets an Rolling, only God and Providence will say..On the other hand, I would be honored if I could buy you guys a round for extending the offer to help, means alot, I am far far from my home here and have no buds or support group... gets feeling dicey if that makes any sense to ya
So. Pick a night, Pick a bar, I get ya all a round... Just needs to be after I get my car done / back and I live right across from the Mill Creek Town offices sorta )
Yay me
TECH Addict
Joined: Mar 2004
Posts: 2,563
Likes: 0
From: Seattle, WA
I hope you get that thing worked out. There are some great brains and braun here on this forum. But faith in God does not hurt either. He will always make a way. I just wish I knew more about what you need to have done myself because I do like to help when I am able.
Sounds like things might be going well. If not, I may be able to spare a whole day of help. Be warned........I've never pulled a motor, but would love to do it and am willing to help a fellow NW guy out if I'm not working! PM me if you need me.
Originally Posted by sidewayz28
dude i lend a hand for free...
And so far, things look good, another few days I will know if I can afford what has to be done or if its back to the drawing board.
Lots of guys have offered help and just as important, knowledge.
My thanks again to all of you I will keep this thread updated, and / or pester you with PMs if this plan goes south.