Dyno Anyone?
09-13-2006 | 11:25 PM
#41
Originally Posted by Rollin Black
Hello Mark.
Can you please put me on the schedule for 3 pulls with wideband.
I can be up there around 12 noon.
Thanks, Perry
P.S. Robert & Jon - Hopefully you guys will be heading north around 10 to 10:30 AM. If so, let me know and I will hook up with you.
Can you please put me on the schedule for 3 pulls with wideband.
I can be up there around 12 noon.
Thanks, Perry
P.S. Robert & Jon - Hopefully you guys will be heading north around 10 to 10:30 AM. If so, let me know and I will hook up with you.
Robert
09-14-2006 | 12:41 AM
#43
Originally Posted by Robert56@NitrousDirect
What do you need? I have a brand new purge noid, it's the CF one but indentical to the NX one. I have a 4an line also, so you can run your 200hp jets, and also a fitting I am sure (if not I'll get one from work). So...
Robert
Robert
I still don't have any of my other parts. Like the cage, harness, 02 sensors, etc. They all should be in soon! In fact, they ALL should be in the mail, except the 02 sensors. They are wainting for me to pick them up from schmucks.
I'll PM you tomorrow! I got to hit the hay......
09-14-2006 | 01:47 AM
#45
Originally Posted by Robert56@NitrousDirect
Sounds good to me, however, undecided on going if it's raining?
Robert
Robert
A little rain is okay.
My last dyno day, it snowed all the way to Kirkland then rained the rest of the way. But we still got her on the rollers
09-14-2006 | 11:55 AM
#46
Well I got a PM from Dave that said the parts are shipping today. So I doubt that they'll be delivered in time for me to have the car ready for the dyno day!
Maybe Robert and I can figure something out though.
Robert, I sent you a PM!
Maybe Robert and I can figure something out though.
Robert, I sent you a PM!
09-14-2006 | 04:56 PM
#48
Thread Starter
10 Second Club
iTrader: (4)
Joined: Feb 2004
Posts: 9,448
Likes: 0
From: Marysville, WA
Originally Posted by NVME
0800 huh? I may just ride down and say, "Howdy!" 
I will be there at 8....c'mon down. I've been dying to see your car too.
09-14-2006 | 05:13 PM
#49
Mark.
As I and others may never have been to this shop, could you post the shops name, full address and phone number.
Thanks, Perry
P.S. Maybe you can also write Ellis a note so he can skip school and come join us
As I and others may never have been to this shop, could you post the shops name, full address and phone number.
Thanks, Perry
P.S. Maybe you can also write Ellis a note so he can skip school and come join us
09-14-2006 | 05:18 PM
#50
Originally Posted by 00Vette
Well I got a PM from Dave that said the parts are shipping today. So I doubt that they'll be delivered in time for me to have the car ready for the dyno day!
Maybe Robert and I can figure something out though.
Robert, I sent you a PM!
Maybe Robert and I can figure something out though.
Robert, I sent you a PM!
Get'r done!
I am sure you and Robert can figure it out, but I also have a few nitrous parts lying around, so if you guys need anything give me a holler.
Be great to have 3 or more of us driving up the freeway to Marysville
09-14-2006 | 06:00 PM
#51
TECH Enthusiast
Joined: Mar 2005
Posts: 701
Likes: 0
From: Arlington, WA
Got my tune just an hour ago. Will try it out when I get home.
So consider me in.
Anyone know where to buy a bottle of Torco? Or unleaded race gas. I just need a shot of it to verify it's above 92.
So consider me in.
Anyone know where to buy a bottle of Torco? Or unleaded race gas. I just need a shot of it to verify it's above 92.
09-14-2006 | 06:13 PM
#52
Well hell................if all the big dogs are going out to this, I'm going to HAVE to find a way to make it.
So sign me up and I'll find a way to make it. Perry said he has a purge noid I can borrow..........and bottom line is I really don't NEED it. Its just nice to have.
So I'm in!!!!
So sign me up and I'll find a way to make it. Perry said he has a purge noid I can borrow..........and bottom line is I really don't NEED it. Its just nice to have.
So I'm in!!!!
09-14-2006 | 06:15 PM
#53
Originally Posted by WAHUSKER
Damn, ALL the hot rods are coming out to play....except the Blue Devil.
I will be there at 8....c'mon down. I've been dying to see your car too.
I will be there at 8....c'mon down. I've been dying to see your car too.
Notice I said RIDE down.
My Scheiße!-box is apart (See avatar). Neverless I will be there so everybody can take turns kicking me in the junk. Last edited by NVME; 09-14-2006 at 06:22 PM.
09-14-2006 | 06:29 PM
#54
Originally Posted by Tylerb59
Got my tune just an hour ago. Will try it out when I get home.
So consider me in.
Anyone know where to buy a bottle of Torco? Or unleaded race gas. I just need a shot of it to verify it's above 92.
So consider me in.
Anyone know where to buy a bottle of Torco? Or unleaded race gas. I just need a shot of it to verify it's above 92.
If you can't find any where you are let me know and I can bring a little sip of TORCO along with me to the dyno day. I should be there around 11:30 - 12:00 noon.
Perry
09-14-2006 | 06:32 PM
#55
Originally Posted by WAHUSKER
Here are the plans for the upcoming dyno day at Marysville Speed
Saturday 9/16, starts @ 8:00 AM
$60 for 3 pulls w/wideband readout
$75 / hr for tuning (your tuning software, they will help if needed)
So who wants to go? What time can you be there? I can be there early, but I'm assuming people want to see my car & Ryan's duke it out, so I was thinking we wouldn't go first. Any volunteers?
I NEED A COUNT OF CARS that are going so that they can get other cars in! This will be firm, so let me know if you are not 100% sure you're going, and you might get on as time allows.
Mark
425-501-4305
PS Ellis - they can get you in on Friday 9/22 at 9:00AM
Saturday 9/16, starts @ 8:00 AM
$60 for 3 pulls w/wideband readout
$75 / hr for tuning (your tuning software, they will help if needed)
So who wants to go? What time can you be there? I can be there early, but I'm assuming people want to see my car & Ryan's duke it out, so I was thinking we wouldn't go first. Any volunteers?
I NEED A COUNT OF CARS that are going so that they can get other cars in! This will be firm, so let me know if you are not 100% sure you're going, and you might get on as time allows.
Mark
425-501-4305
PS Ellis - they can get you in on Friday 9/22 at 9:00AM
09-14-2006 | 06:54 PM
#56
TECH Apprentice
Joined: Jul 2005
Posts: 318
Likes: 0
From: Marysville,WA
3 pulls is $60, comes with the w/b read out. Sorry, best I can do (compare to $225 at Carb Conn in Redmond)
Perry - EJ posted this a while back
Marysville Speed and Custom
13319 38th ave. NE Suite C&D
Marysville WA
360-658-2732.
It's just south of the Sears Repair Shop & just east of Marysville Ford.
I can swing by Nelson Petroleum & get some Sunoco 100 unleaded Tyler. It's like $8 / gal. How much do you want?
This is Mark posting under my alias (when I'm in touch with my feminine side)
Perry - EJ posted this a while back
Marysville Speed and Custom
13319 38th ave. NE Suite C&D
Marysville WA
360-658-2732.
It's just south of the Sears Repair Shop & just east of Marysville Ford.
I can swing by Nelson Petroleum & get some Sunoco 100 unleaded Tyler. It's like $8 / gal. How much do you want?
This is Mark posting under my alias (when I'm in touch with my feminine side)
09-14-2006 | 07:54 PM
#57
TECH Enthusiast
Joined: Mar 2005
Posts: 701
Likes: 0
From: Arlington, WA
Originally Posted by Rollin Black
Hello Tyler.
If you can't find any where you are let me know and I can bring a little sip of TORCO along with me to the dyno day. I should be there around 11:30 - 12:00 noon.
Perry
If you can't find any where you are let me know and I can bring a little sip of TORCO along with me to the dyno day. I should be there around 11:30 - 12:00 noon.
Perry
Mark - I live in town, the Nelson is down the street from me. I thought I read it was LEADED though. In the morning I'll go see if I can squirt a few gallons in for security.
My timing is pulled back. Wayyy back, but I don't want to find out on the dyno I'm running too low on the octane.
Thanks!
09-14-2006 | 08:14 PM
#58
Originally Posted by Tylerb59
That'd be cool. Where do you buy yours? Schucks, NAPA?
Mark - I live in town, the Nelson is down the street from me. I thought I read it was LEADED though. In the morning I'll go see if I can squirt a few gallons in for security.
My timing is pulled back. Wayyy back, but I don't want to find out on the dyno I'm running too low on the octane.
Thanks!
Mark - I live in town, the Nelson is down the street from me. I thought I read it was LEADED though. In the morning I'll go see if I can squirt a few gallons in for security.
My timing is pulled back. Wayyy back, but I don't want to find out on the dyno I'm running too low on the octane.
Thanks!
Robert
09-14-2006 | 08:16 PM
#59
Originally Posted by Rollin Black
Jon.
Get'r done!
I am sure you and Robert can figure it out, but I also have a few nitrous parts lying around, so if you guys need anything give me a holler.
Be great to have 3 or more of us driving up the freeway to Marysville
Get'r done!
I am sure you and Robert can figure it out, but I also have a few nitrous parts lying around, so if you guys need anything give me a holler.
Be great to have 3 or more of us driving up the freeway to Marysville
Robert
09-14-2006 | 08:38 PM
#60
Originally Posted by VIKING
3 pulls is $60, comes with the w/b read out. Sorry, best I can do (compare to $225 at Carb Conn in Redmond)
Perry - EJ posted this a while back
Marysville Speed and Custom
13319 38th ave. NE Suite C&D
Marysville WA
360-658-2732.
It's just south of the Sears Repair Shop & just east of Marysville Ford.
I can swing by Nelson Petroleum & get some Sunoco 100 unleaded Tyler. It's like $8 / gal. How much do you want?
This is Mark posting under my alias (when I'm in touch with my feminine side)
Perry - EJ posted this a while back
Marysville Speed and Custom
13319 38th ave. NE Suite C&D
Marysville WA
360-658-2732.
It's just south of the Sears Repair Shop & just east of Marysville Ford.
I can swing by Nelson Petroleum & get some Sunoco 100 unleaded Tyler. It's like $8 / gal. How much do you want?
This is Mark posting under my alias (when I'm in touch with my feminine side)
Perry