Need part
Thread Starter
FormerVendor
Joined: May 2004
Posts: 247
Likes: 0
From: Portland Oregon
Need part Anyone out there have a used 1999 and up C5 crank balancer? I am in the middle of a head and cam package and found that the owners crank balancer sealing surface has a very deep groove cut into it.
Ellis you happen to have one of these laying around?
Ellis you happen to have one of these laying around?
Thread Starter
FormerVendor
Joined: May 2004
Posts: 247
Likes: 0
From: Portland Oregon
I have no idea what a used one is worth or for that matter what a new GM replacement is worth. I will have to call a dealer monday to see what I can get it for. I offered a powerbond balancer but the owner didn't want to go that route. What would you take for it, the balancer has to be Corvette specific, I don't think a F body or other vehicles will work on a Corvette.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by tjwong
I have no idea what a used one is worth or for that matter what a new GM replacement is worth. I will have to call a dealer monday to see what I can get it for. I offered a powerbond balancer but the owner didn't want to go that route. What would you take for it, the balancer has to be Corvette specific, I don't think a F body or other vehicles will work on a Corvette.
Robert
Thread Starter
FormerVendor
Joined: May 2004
Posts: 247
Likes: 0
From: Portland Oregon
Originally Posted by Robert56
You have any Throttle Bodies or MAFs that'll work on my LS6 top end? The balancer is off my old LS6.
Robert
Robert
Thread Starter
FormerVendor
Joined: May 2004
Posts: 247
Likes: 0
From: Portland Oregon
Originally Posted by Robert56
Isn't the LS6 intake 80 or 85 mm?
Robert
Robert
yea, checked it out, the Z06 Maf's are 85mm and the ls1 is 78mm, and tb are all the same (except fly by wire of course). I have another deal in the works for a TB from memeber Beer, so we'll see which is a better deal. Still don't know what a used balancer is worth? I did see a cable TB in the for sale for $65, so...
Robert
Robert
