Seattle Tuners
Seattle Tuners Are there ANY sponsors here that tune and/or dyno tune LS1 cars?
I'm needed a tune as the previous owner put long tubes on and I can tell it needs a tune and is running VERY rich. TSP true duals with no cats either, and I have no codes, so he got the codes cleared but I doubt he tuned the engine.
Thanks let me know who is around here!
I'm needed a tune as the previous owner put long tubes on and I can tell it needs a tune and is running VERY rich. TSP true duals with no cats either, and I have no codes, so he got the codes cleared but I doubt he tuned the engine.
Thanks let me know who is around here!
Oh ok thanks for the information there.
Anybody heard of these guys?
http://www.trifectaperformance.com/about.aspx
I am not sure if they are a sponsor or not, so a mod can delete the link if this is a no-no.
Anybody heard of these guys?
http://www.trifectaperformance.com/about.aspx
I am not sure if they are a sponsor or not, so a mod can delete the link if this is a no-no.
Not sure if Vince at Trifecta is a sponsor or not, but he's a good guy with real insight to how the VCMs work in our cars. I'm uncertain (but certainly don't wish to disparage) of their mad tuning skillz, but I know Vince understands the data flowing through the buses better than some companies that make tuning software...
Oh ok thanks for the information there.
Anybody heard of these guys?
http://www.trifectaperformance.com/about.aspx
I am not sure if they are a sponsor or not, so a mod can delete the link if this is a no-no.
Anybody heard of these guys?
http://www.trifectaperformance.com/about.aspx
I am not sure if they are a sponsor or not, so a mod can delete the link if this is a no-no.
Robert
Trending Topics
Vince (trifecta) helped me out with a messed up mail order tune, didn't take him long to figure out what needed to be done. Heck of nice guy to deal with. Had some dyno time as well as some full out street runs for some fine tuneing.
Danv
Danv
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Does anybody here know if they do minor engine work as well? Long story short I am getting some polly engine mounts as mine are shot and was wondering if you know if any of these sponsors do that type of work also.
Joined: Nov 2001
Posts: 10,023
Likes: 6
From: LT1 land...the "409" of the 90s!
Vince at Trifecta is a good guy but his thing is mail order last I checked. We can get to him local and he does understand the communications aspect really well.
He has developed a nice handheld you rent to get the job done and uses PCM4Less tunes if I remember right. This is a great setup for shipping tunes to people.
He has developed a nice handheld you rent to get the job done and uses PCM4Less tunes if I remember right. This is a great setup for shipping tunes to people.
I am going to be needing a tune by the end of Feb. But I am not sure Ellis will have time. And I don't really want to drive to Turbo tech, and also pay there price. Maybe I will give this guy a call and see what he can do for me.. But if Ellis will have the time, I will go with him....
Lane
Lane
Joined: Nov 2001
Posts: 10,023
Likes: 6
From: LT1 land...the "409" of the 90s!
I am going to be needing a tune by the end of Feb. But I am not sure Ellis will have time. And I don't really want to drive to Turbo tech, and also pay there price. Maybe I will give this guy a call and see what he can do for me.. But if Ellis will have the time, I will go with him....
Lane
Lane
I had time last time you needed it 
I'm asking a somewhat similar question again but for different terms, so I am just going to add it onto this thread that I already made:
I plan on going to Ellis for my tuning needs.
I however do not know if there are any shops out there that work on F bodys a lot or places that can do good work in the Seattle area. (Who knows, maybe Ellis is one of these people but I've never asked... but he may just be a tuner...)
I plan on doing most of the mods (so far I have) myself, but certain things like motor mounts and (possibly) cam install I do not have the tools or even the location to do so if I even had the tools.
What local areas do work like this? Thanks!
I plan on going to Ellis for my tuning needs.
I however do not know if there are any shops out there that work on F bodys a lot or places that can do good work in the Seattle area. (Who knows, maybe Ellis is one of these people but I've never asked... but he may just be a tuner...)
I plan on doing most of the mods (so far I have) myself, but certain things like motor mounts and (possibly) cam install I do not have the tools or even the location to do so if I even had the tools.
What local areas do work like this? Thanks!
10 Second Club
Joined: Jul 2005
Posts: 702
Likes: 0
I'm asking a somewhat similar question again but for different terms, so I am just going to add it onto this thread that I already made:
I plan on going to Ellis for my tuning needs.
I however do not know if there are any shops out there that work on F bodys a lot or places that can do good work in the Seattle area. (Who knows, maybe Ellis is one of these people but I've never asked... but he may just be a tuner...)
I plan on doing most of the mods (so far I have) myself, but certain things like motor mounts and (possibly) cam install I do not have the tools or even the location to do so if I even had the tools.
What local areas do work like this? Thanks!
I plan on going to Ellis for my tuning needs.
I however do not know if there are any shops out there that work on F bodys a lot or places that can do good work in the Seattle area. (Who knows, maybe Ellis is one of these people but I've never asked... but he may just be a tuner...)
I plan on doing most of the mods (so far I have) myself, but certain things like motor mounts and (possibly) cam install I do not have the tools or even the location to do so if I even had the tools.
What local areas do work like this? Thanks!
He has done tons of work fo me and many others on this board. His work is top notch and his prices are better than most.
Have him do your work - you won't be disapointed.