GMHTP LTX vs LSX Shootout
#26
On The Tree
Thread Starter
Join Date: Dec 2004
Location: Temecula, CA
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The word from the track is no gutted race mufflers or resonators (on supercharged, nitrous, n/a cars), there has to be some baffling as a general guideline. Otherwise you will have a hard time staying under 95 db. To stay in good standing with the track we will be enforcing this, which means we will have the sound meter with us at the shootout.
#28
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Scott@GMHTP
The word from the track is no gutted race mufflers or resonators (on supercharged, nitrous, n/a cars), there has to be some baffling as a general guideline. Otherwise you will have a hard time staying under 95 db. To stay in good standing with the track we will be enforcing this, which means we will have the sound meter with us at the shootout.
still running 3in into 4in part through cut out pointed at ground and part through SLP Duel Duel
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
#30
8 Second Club
Join Date: May 2002
Location: Toronto
Posts: 1,043
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
When will the date be set in stone?... the World Street Car Shoot-out in Orlando is at the end of Oct and I will be down for that event...
I normally run with an open electric cutout... I'll see how she runs through the muffler... maybe I could rig something up so that the cutout opens at the 330FT mark![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
PS... that was a joke... kinda...
I normally run with an open electric cutout... I'll see how she runs through the muffler... maybe I could rig something up so that the cutout opens at the 330FT mark
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
PS... that was a joke... kinda...
#33
On The Tree
Thread Starter
Join Date: Dec 2004
Location: Temecula, CA
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by REDGAR
Andre, just send it in so you don't miss the cutoff and in your email state you conerns
#37
9 Second Club
iTrader: (22)
Join Date: Dec 2001
Location: Chicago
Posts: 1,474
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Every shoot out I see in GMHT is either in New Jersy or Houston, why don't you give the midwest guys a shot? We have the fastest cars anyway. Between Detroit and Chitown we have the best. If it was in our back yard I would go, you might even get the 1st and only all motor LS1 in the 8's to go. To have an achievement like that and not be covered in the only mag that caters to our comunity is an embaresment.
#40
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by ONEBADWS6
Every shoot out I see in GMHT is either in New Jersy or Houston, why don't you give the midwest guys a shot? We have the fastest cars anyway. Between Detroit and Chitown we have the best. If it was in our back yard I would go, you might even get the 1st and only all motor LS1 in the 8's to go. To have an achievement like that and not be covered in the only mag that caters to our comunity is an embaresment.