I am removing my front bumper and am having problems......
I have a 01 Trans am (ram air).

So far i have removed the 3 plugs up top, the 3 on the botom (air dam)
I removed the six screws holding the corner pockets and 2 screws on each side in the corner pockets by the outer wall, by the marker lights.

Now what??? It seems that there is some more in there??

Please help

CW

 

check where to bumper meets the fender on the inside there was quite a few bolts that held my bumper on for my camaro.

 

This is what I used to remove the front cover from my '95 T/A. It was exactly the same process. Hope this helps man!
https://ls1tech.com/forums/appearanc...on-photos.html

 

flip up the lights their are 1 each in the corner

 

Thanks
I just found them

You rock!!!!!!!2000AM!!!!!!!!!!