please help!! car is leaning!
Thread Starter
Staging Lane
Joined: May 2004
Posts: 63
Likes: 0
please help!! car is leaning! is there anything that could make the car lean to the passenger side an inch and a half lower than the driver side? it is not the shock or the spring could it be the body itself? if so how do you fix it?
tons of them sit lower on the passenger side. normally about 3/4-1 inch. it's not frame damage or anything. i've heard of a bent swaybar magnifying it, as well as lowering with the phb set too long/short making it worse
Launching!
Joined: Aug 2003
Posts: 248
Likes: 0
how do you know it's not the shock or spring? I assumed you measured wheel well gap to ground as well as measuring the axle to a point on the body? do the same for the front as well and let us know some more details...
Thread Starter
Staging Lane
Joined: May 2004
Posts: 63
Likes: 0
i put new shocks and springs on it still the same problem.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
thanks alot guys! i went out to check the TA and my passenger side is about 1/4" lower than drivers side in the front... the rear is dead even.
Now that gives me something else to think about when i look at my car! was washing the TA and noticed small nicks starting to appear on the hood and a small spot of clear coat coming off on the front bumper.... pisses my off!
Now that gives me something else to think about when i look at my car! was washing the TA and noticed small nicks starting to appear on the hood and a small spot of clear coat coming off on the front bumper.... pisses my off!
Launching!
Joined: Aug 2003
Posts: 248
Likes: 0
thanks alot guys! i went out to check the TA and my passenger side is about 1/4" lower than drivers side in the front... the rear is dead even.
Now that gives me something else to think about when i look at my car! was washing the TA and noticed small nicks starting to appear on the hood and a small spot of clear coat coming off on the front bumper.... pisses my off!
Now that gives me something else to think about when i look at my car! was washing the TA and noticed small nicks starting to appear on the hood and a small spot of clear coat coming off on the front bumper.... pisses my off!
if the rear is dead even, how are the front struts/springs? take any measurements besides fender gap? could be bushings, and or front sway bar/end links...hell if an end link is bent it could cause that.
lots to check out before you start throwing money at it....