Paint & Body Work Custom Painting | Panel Repairs & Replacement

who can roll my fenders - dfw area?

Thread Tools
 
Search this Thread
 
Old 05-08-2011, 02:58 AM
  #1  
Launching!
Thread Starter
 
green manalishi's Avatar
 
Join Date: Apr 2011
Location: orbiting caprica
Posts: 280
Likes: 0
Received 0 Likes on 0 Posts
Question who can roll my fenders - dfw area?

having some clearance issues in the rear....do you know who can roll my fenders?

im in tx near the dfw area, closer to ft worth. anyone had it done? what did it cost ya?

thx in advanced!
Old 05-08-2011, 12:03 PM
  #2  
Staging Lane
 
mhorn0817's Avatar
 
Join Date: Apr 2011
Location: maryland
Posts: 91
Likes: 0
Received 1 Like on 1 Post

Default

make sure whoever does them has done it before, ive seen roookies do it and the buckle marks around the wheel well afterwards, if you cant find a good roller, then you can always take a cutoff wheel and cut the lip off...
Old 05-09-2011, 12:31 AM
  #3  
Launching!
Thread Starter
 
green manalishi's Avatar
 
Join Date: Apr 2011
Location: orbiting caprica
Posts: 280
Likes: 0
Received 0 Likes on 0 Posts
Default

^ thx for the advice....anyone else know of a place?
Old 05-09-2011, 09:47 AM
  #4  
On The Tree
iTrader: (2)
 
IROCSS's Avatar
 
Join Date: Aug 2010
Location: Dallas,TX
Posts: 170
Likes: 0
Received 0 Likes on 0 Posts
Default

http://www.protuningperformance.com/


I used them to roll the fenders on my Monte Carlo SS. Knocked it out in 45 mins and did not crack the paint or over roll them. Excellent work.

A little far, but its an excuse to get out the camaro and good work. Don't trust just anyone to do it. Good luck!
Old 05-09-2011, 10:00 AM
  #5  
10 Second Club
iTrader: (14)
 
SSHAWK's Avatar
 
Join Date: Jan 2010
Location: Forney, Tx
Posts: 468
Likes: 0
Received 1 Like on 1 Post

Default

Contact Sam in my sig he has the tool to do this.
Old 05-09-2011, 02:18 PM
  #6  
TECH Fanatic
 
Brangeta's Avatar
 
Join Date: Jun 2006
Location: Dallas, TX
Posts: 1,411
Received 4 Likes on 4 Posts

Default

I don't have any idea who can do your fenders, but I hope you'll bring your car to Cars & Coffee in Plano some month. I'd love to see that paint in person!
Old 05-09-2011, 11:29 PM
  #7  
Launching!
Thread Starter
 
green manalishi's Avatar
 
Join Date: Apr 2011
Location: orbiting caprica
Posts: 280
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by IROCSS
http://www.protuningperformance.com/


I used them to roll the fenders on my Monte Carlo SS. Knocked it out in 45 mins and did not crack the paint or over roll them. Excellent work.

A little far, but its an excuse to get out the camaro and good work. Don't trust just anyone to do it. Good luck!
Originally Posted by SSHAWK
Contact Sam in my sig he has the tool to do this.

thx info guys...i will check both of them out. hope i can get this done asap cause it really scrapes bad when i hit a good bump.
Old 05-10-2011, 08:23 AM
  #8  
10 Second Club
iTrader: (14)
 
SSHAWK's Avatar
 
Join Date: Jan 2010
Location: Forney, Tx
Posts: 468
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by green manalishi
thx info guys...i will check both of them out. hope i can get this done asap cause it really scrapes bad when i hit a good bump.
No problem..

Quick question did a guy in Weatherford paint your car?
Old 05-11-2011, 02:39 AM
  #9  
Launching!
Thread Starter
 
green manalishi's Avatar
 
Join Date: Apr 2011
Location: orbiting caprica
Posts: 280
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Brangeta
I don't have any idea who can do your fenders, but I hope you'll bring your car to Cars & Coffee in Plano some month. I'd love to see that paint in person!
i plan on making it up there some time but i will prob show up in my jdm mkiv surpa tho. guys from my surpra forum have been asking me to go to that meet for awhile and havent gone cause its so far away. im the only one on there so far with a right hand drive.

i'll hit you up if i go...and i will eventually take the bird there too to rub it in there face...lol. the do give me a hard time about the ws6 sometimes. this color is way too loud for most of those guys.



Originally Posted by SSHAWK
No problem..

Quick question did a guy in Weatherford paint your car?
im not sure....i bought it from a guy in san angelo less than a year ago. i did notice on the car report that someone in weatherford had it at one time. do you know someone there that has/had one? im about 30 from weatherford.

the other thing is a buddy of mine on fbn sent me pics last week of another green fb in springtown which is about 10 miles north of weatherford. funny thing is it has the same rims too...not sure if it is a ws6 tho.
Old 05-11-2011, 10:58 AM
  #10  
10 Second Club
iTrader: (14)
 
SSHAWK's Avatar
 
Join Date: Jan 2010
Location: Forney, Tx
Posts: 468
Likes: 0
Received 1 Like on 1 Post

Default

I think I Know who painted your car for you.

http://www.cardomain.com/ride/384406...rans-am/page-2

Levrie's Customs

On the corner of FM 51 and Greenbranch rd Weatherford tx

Old 05-11-2011, 02:55 PM
  #11  
Launching!
Thread Starter
 
green manalishi's Avatar
 
Join Date: Apr 2011
Location: orbiting caprica
Posts: 280
Likes: 0
Received 0 Likes on 0 Posts
Default

^they could have been the ones....lp doesnt match but it is the same rims. mine is a ws6 w/ls1 too. like i said another guy saw one recently in w'ford / springtown which is off of hwy 51 also. shows he sold it, which could be the one i got and prob started another one to sell. idk. im gonna see if i can contact them....would be cool to know the whole story. thx for the info man.
Old 05-12-2011, 10:38 PM
  #12  
10 Second Club
iTrader: (14)
 
SSHAWK's Avatar
 
Join Date: Jan 2010
Location: Forney, Tx
Posts: 468
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by green manalishi
^they could have been the ones....lp doesnt match but it is the same rims. mine is a ws6 w/ls1 too. like i said another guy saw one recently in w'ford / springtown which is off of hwy 51 also. shows he sold it, which could be the one i got and prob started another one to sell. idk. im gonna see if i can contact them....would be cool to know the whole story. thx for the info man.
No problem... Lets us know what you find out. I saw the one he was doing about 3 months ago and it looked pretty good.. Some guy that works for Boeing had them paint the TA and build him a motor for the car.
Old 05-14-2011, 01:35 AM
  #13  
Staging Lane
iTrader: (8)
 
rubeng's Avatar
 
Join Date: Jan 2011
Location: Kingwood
Posts: 80
Likes: 0
Received 1 Like on 1 Post
Default

Im also looking for someone in the houston area.
Old 05-14-2011, 11:49 AM
  #14  
10 Second Club
iTrader: (14)
 
SSHAWK's Avatar
 
Join Date: Jan 2010
Location: Forney, Tx
Posts: 468
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by rubeng
Im also looking for someone in the houston area.
Contact retardedpenguin on here..

He has a body shop in Pearland.
Old 05-15-2011, 02:17 PM
  #15  
TECH Senior Member
iTrader: (34)
 
DopeFedZ's Avatar
 
Join Date: Apr 2002
Location: Houston TX
Posts: 5,230
Received 19 Likes on 13 Posts

Default

I roll them in Houston for any locals interested.
Old 05-18-2011, 12:15 AM
  #16  
The Scammer Hammer
iTrader: (49)
 
dr_whigham's Avatar
 
Join Date: Apr 2009
Location: Lafayette, LA
Posts: 6,708
Received 21 Likes on 17 Posts

Default

Lafayette, Louisiana area, anyone?
Old 05-18-2011, 11:53 PM
  #17  
Teching In
iTrader: (1)
 
garrett98sscamaro's Avatar
 
Join Date: Sep 2006
Location: DFW Texas
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

Where you at in DFW I am near Fort Worth too. Do you know any f-body hang outs? And let me know where you get your fenders done at.



Quick Reply: who can roll my fenders - dfw area?



All times are GMT -5. The time now is 06:11 AM.