Removing the ground effects??
01-03-2012, 09:23 PM
#1
Teching In
Thread Starter
Join Date: Dec 2011
Location: Clyde NC
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Removing the ground effects?? Thinking on Pulling the ground effects of my 02 Z and repainting the car. Anyone else on here pulled there's off and filled the holes in were the rivets hold the guides on?
01-04-2012, 06:10 PM
#2
Teching In
iTrader: (2)
Join Date: Jun 2011
Location: Milo, IA
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
I have an 02 z28 that had the kit on it. I took off everything except the spoiler And actually just got done w/ filling the holes w/ panel bond & bondo, then repainted the rocker panels and the spoiler. the holes on the front and rear bumper are not as noticeable as the side skirts are. I took black touch up paint from my vin # so it would match and touched up the bumper holes w/ that paint & a small tipped brushed,
01-08-2012, 09:41 PM
#7
Teching In
iTrader: (2)
Join Date: Jun 2011
Location: Milo, IA
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
When i took the rivets off I took a drill and drilled out holes and the and they popped right out. Just be careful because you obviously don't want to drill to big of holes. Get a drill bit the exact size of the rivet. I unfortunatley do not have pics of the holes. I just got done painting the rocker panels and the holes are now filled and looks like it never happened. since my dad & I paint for a living it cost me $170 for paint (left over from painting my cowl hood) and around 10-12 hrs of my own time.
