**** 4th gen Trans Am Ultimate Restoration ****
#142
TECH Enthusiast
Damn, that's impressive, I kind of laughed when you had the mufflers and wheels ready and the rest of the car was junk at the beginning. You proved me wrong in a hurry!.
The following users liked this post:
SCLT1 (04-15-2021)
#154
TECH Fanatic
#157
Can you tell me if there is access for mice to get into the rocker panels from behind the front fender/wheel well. I see you had the front fenders off of the car but I was unable to determine by looking at the pictures if such a hole exists. Mice have made there way inside my 99 Camaro and I haven't been able to figure out how. Any suggestions would be greatly appreciated. Thanks
Nice Job on the Trans AM.
Nice Job on the Trans AM.
#158
TECH Resident
iTrader: (4)
Here are some pics I took after removing my front fender liner. It looks like they can get into the space in the door jamb, but not below. There is one area where the air goes into two holes and out a larger rounded-rectangular hole. I thought it was enclosed, but it is possible there is a passage a mouse could use to access the rocker.
#160
Thanks for the help guys. Those pics from eb110americana give me a much better idea of what is behind the wheel liner. I will have to remove the wheel liner and try to fish a wire from inside the car through a hole in the sill to see if it leads to the holes outside. I removed the blower motor because I thought they might be getting in through the cabin air intake. No sign of mice there though. I have a hole eaten through my headliner down into the car from above. We are going to figure this out!