themealonwheels

iTrader: (20)

yep, and preferably, use the powder coat store's high gloss clear. it cures at 350, so if the coats under it aren't fully cured, the clear layer seals them in. Make sure to off gas for a long while, these intakes have a lot of oil in them. And put it on wood blocks, the racks create hot spots that will melt the plastic.

themealonwheels

iTrader: (20)

Here's another fast powder coated Illusion cherry, and one in black starlight

themealonwheels

iTrader: (20)

This one is resale red, chevy orange, zinc yellow and clear for a swap into an frs

joeformula

iTrader: (11)

That’s pretty good

themealonwheels

iTrader: (20)

Here's another, cosmic kari and spiced black.