LS6 Paint??
04-18-2007, 06:59 PM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Rochester Ny
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
LS6 Paint?? Tried the search and it isnt working(shocking). What is the best paint/primer/clear coat to use to paint and ls6 intake? Also, if anyones got pics that would be great..Thanks
04-19-2007, 01:44 AM
#2
I used Parbreak's write up here. --> https://ls1tech.com/forums/showpost....61&postcount=9
I used Duplicolor Rattlecans and everything turned out good. High Build Primer, Adhesion Promoter, Silver Paint and Clear Coat. Here are my pics and semi-write up here. -->
http://www.geocities.com/mrmtransam/intake/
FWIW, some use airbrushes and high end PPG paint, etc. Depends on your budget and knowledge/skill. Rattlecan worked great IMO.
I used Duplicolor Rattlecans and everything turned out good. High Build Primer, Adhesion Promoter, Silver Paint and Clear Coat. Here are my pics and semi-write up here. -->
http://www.geocities.com/mrmtransam/intake/
FWIW, some use airbrushes and high end PPG paint, etc. Depends on your budget and knowledge/skill. Rattlecan worked great IMO.