bouncy driver's door mirror
#1
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Dec 2003
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
bouncy driver's door mirror
My driver's door mirror has started to bounce around in the mirror housing and is driving me nuts. What is the fix for this?? I've looked and can't see where I can tighten any bolts or screws??
#2
TECH Resident
iTrader: (31)
Join Date: Mar 2006
Location: Denton, Texas
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
there is a bracket which attaches to the mirror and to the car. tighten the bolts and screws/torx bolts, and you should be fine.
I had my driver's side bracket snap, its aluminum, and just replaced it a few weeks ago. I did end up taking my door panel off before I was through though.
I had my driver's side bracket snap, its aluminum, and just replaced it a few weeks ago. I did end up taking my door panel off before I was through though.
#3
TECH Senior Member
iTrader: (11)
My passenger one bounces, the glass bounces inside the housing. Found that when the previous owner smacked the mirror he broke one of the plastic tabs that holds the glass in place. If that is your problem you may be able to glue it back down, I haven't bothered trying since I have to replace my mirror at some point anyway.
#4
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Dec 2003
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
My passenger one bounces, the glass bounces inside the housing. Found that when the previous owner smacked the mirror he broke one of the plastic tabs that holds the glass in place. If that is your problem you may be able to glue it back down, I haven't bothered trying since I have to replace my mirror at some point anyway.
Cool...Thanks