2001 Corvette Z06 Rolling Driveline Ls6 6 Speed Complete!
09-02-2009, 08:13 AM
#1
Closed ex-Sponsor Account
Thread Starter
iTrader: (6)
Join Date: Jan 2006
Location: Columbia Station, OH
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
2001 Corvette Z06 Rolling Driveline Ls6 6 Speed Complete! CLEVELAND PICK-A-PART IS PROUD TO OFFER THIS 2001 CHEVROLET CORVETTE Z06 ROLLING CHASSIS!
This listing is for a complete rolling chassis removed from a 2001 Chevrolet Z06 Corvette! This chassis features a 385 HP 5.7L LS6 engine and M12 6-speed manual transmission!
This chassis will include the following:
2001 Chevrolet Corvette 5.7L 385 HP LS6 engine
M12 6-speed manual transmission
Complete front and rear FE4 suspensions
3.42 rear differential
Floor shifter
LH and RH fuel tanks and fuel pumps
OEM titanium exhaust found on the Z06's only
Charcoal canister
Fuel crossover pipe
Complete anti-lock brake system with booster and module
Engine computer and engine harness
Transmission harness
Throttle control module
Complete Body harness to help get your project started
OEM VIN matching key w/ computer
Air flow meter
Pedals
Brake lines and fuel lines
Steering column with tilt wheel
Leather wrapped steering wheel (no air bag)
5 spoke 17 X 9.5 chrome wheels with 265/40/R17 Firestone Firehawk's
5 spoke 18 X 10.5 chrome wheels with 295/35/ZR18 Kuhmo Ecsta's
Here is the VIN number from this Corvette: 1G1YY12SX15123981
At Cleveland Pick-A-Part we thoroughly inspect each motor and transmission and then back it with our standard 6 month warranty!
Before we start each engine, we remove all the spark plugs and hand turn the engine over to make sure no oil has passed the rings.
We do a compression test. Why? A compression test is done to make sure the rings and valves are sealing properly as well as the head gasket.
We do a vacuum test. Why? A vacuum test is done to make sure there is no burned or sticking valves or a collapsed lifter or vacuum leaks.
We do a oil pressure test. Why? A oil pressure test is done at cold start up and warm operating temperature to ensure proper bearing clearance and that there are no restrictions in the oiling system as well as proper operating specifications.
We do a CO test. Why? A CO test is done to make sure there are no cracks in the block, heads, and head gaskets and well as making sure there are no exhaust gases present in the cooling system.
We inspect our manual transmissions by draining and inspecting the fluid and magnets for any debris or contamination. We then refill the transmission with new fluid and run test it through all of the gears to ensure it shifts properly. If any problems are found, the transmission will be torn down for inspection and repaired as necessary.
THIS IS THE ACTUAL CHASSIS PICTURED YOU WILL RECIEVE!
This item is also listen on ebay item number 360183185647 for more details, info, and more pics.
We will not list a chassis until it has been inspected and run tested!
Compression was a TIGHT 200 over 190: 1-200 2-195 3-190 4-195 5-200 6-195 7-190 8-195
Vacuum was a SOLID 20 inches
Oil pressure was 70 pounds cold, and 60 pounds warm
CO check PASS
Here is a Video of this engine running:
http://s196.photobucket.com/albums/a...t=MOV00227.flv
Price: 7499.99 + Shipping. Can ship ANYWHERE!
Call Tom or Gus at 866-236-5031
This listing is for a complete rolling chassis removed from a 2001 Chevrolet Z06 Corvette! This chassis features a 385 HP 5.7L LS6 engine and M12 6-speed manual transmission!
This chassis will include the following:
2001 Chevrolet Corvette 5.7L 385 HP LS6 engine
M12 6-speed manual transmission
Complete front and rear FE4 suspensions
3.42 rear differential
Floor shifter
LH and RH fuel tanks and fuel pumps
OEM titanium exhaust found on the Z06's only
Charcoal canister
Fuel crossover pipe
Complete anti-lock brake system with booster and module
Engine computer and engine harness
Transmission harness
Throttle control module
Complete Body harness to help get your project started
OEM VIN matching key w/ computer
Air flow meter
Pedals
Brake lines and fuel lines
Steering column with tilt wheel
Leather wrapped steering wheel (no air bag)
5 spoke 17 X 9.5 chrome wheels with 265/40/R17 Firestone Firehawk's
5 spoke 18 X 10.5 chrome wheels with 295/35/ZR18 Kuhmo Ecsta's
Here is the VIN number from this Corvette: 1G1YY12SX15123981
At Cleveland Pick-A-Part we thoroughly inspect each motor and transmission and then back it with our standard 6 month warranty!
Before we start each engine, we remove all the spark plugs and hand turn the engine over to make sure no oil has passed the rings.
We do a compression test. Why? A compression test is done to make sure the rings and valves are sealing properly as well as the head gasket.
We do a vacuum test. Why? A vacuum test is done to make sure there is no burned or sticking valves or a collapsed lifter or vacuum leaks.
We do a oil pressure test. Why? A oil pressure test is done at cold start up and warm operating temperature to ensure proper bearing clearance and that there are no restrictions in the oiling system as well as proper operating specifications.
We do a CO test. Why? A CO test is done to make sure there are no cracks in the block, heads, and head gaskets and well as making sure there are no exhaust gases present in the cooling system.
We inspect our manual transmissions by draining and inspecting the fluid and magnets for any debris or contamination. We then refill the transmission with new fluid and run test it through all of the gears to ensure it shifts properly. If any problems are found, the transmission will be torn down for inspection and repaired as necessary.
THIS IS THE ACTUAL CHASSIS PICTURED YOU WILL RECIEVE!
This item is also listen on ebay item number 360183185647 for more details, info, and more pics.
We will not list a chassis until it has been inspected and run tested!
Compression was a TIGHT 200 over 190: 1-200 2-195 3-190 4-195 5-200 6-195 7-190 8-195
Vacuum was a SOLID 20 inches
Oil pressure was 70 pounds cold, and 60 pounds warm
CO check PASS
Here is a Video of this engine running:
http://s196.photobucket.com/albums/a...t=MOV00227.flv
Price: 7499.99 + Shipping. Can ship ANYWHERE!
Call Tom or Gus at 866-236-5031
09-15-2009, 10:20 AM
#5
Closed ex-Sponsor Account
Thread Starter
iTrader: (6)
Join Date: Jan 2006
Location: Columbia Station, OH
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Sorry we include those modules with the sale of an engine, for wheels give me a call for any wheel questions at 866-236-5031
this Driveline SOLD
I have another on the way!
Tom
this Driveline SOLD
I have another on the way!
Tom
