Fidanza aluminum flywheel w/ ls6 clutch
10-23-2009, 02:59 PM
#1
Teching In
Thread Starter
iTrader: (12)
Join Date: Mar 2006
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Fidanza aluminum flywheel w/ ls6 clutch Decided I wanted a heavier clutch and decided to try out a Monster so I'm selling my former setup.
For Sale:
Fidanza ls1 aluminum flywheel comes with a a low mileage ls6 clutch from an 04 GTO. Everything looks to be in very good condition and it had no sign of chatter or misbehaviour when I pulled it out. There's a bit of heat checking on the friction surfaces but everything is flat there's no sign of scoring so all you'll need to do is give it a light buffing with sandpaper and you should be good to go.
Friction disk is presently 0.334" thick with ~0.100" depth remaining to the rivets on both sides. Tons of life left here.
$250 plus actual shipping to the lower 48 states.
If requested I can throw in a 3,000 mile slave (I change them out every time I do a clutch job regardless if they need it or not), new GM flywheel to crank bolts, plus a clutch alignment tool for a few dollars more.
For Sale:
Fidanza ls1 aluminum flywheel comes with a a low mileage ls6 clutch from an 04 GTO. Everything looks to be in very good condition and it had no sign of chatter or misbehaviour when I pulled it out. There's a bit of heat checking on the friction surfaces but everything is flat there's no sign of scoring so all you'll need to do is give it a light buffing with sandpaper and you should be good to go.
Friction disk is presently 0.334" thick with ~0.100" depth remaining to the rivets on both sides. Tons of life left here.
$250 plus actual shipping to the lower 48 states.
If requested I can throw in a 3,000 mile slave (I change them out every time I do a clutch job regardless if they need it or not), new GM flywheel to crank bolts, plus a clutch alignment tool for a few dollars more.
Trending Topics
02-14-2010, 05:53 PM
#9
Teching In
Thread Starter
iTrader: (12)
Join Date: Mar 2006
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Flywheel is sold.
Clutch and slave are available.
Slave had occasional clutch dust issues (see also http://www.youtube.com/watch?v=gBbsy0LjUvE) but this likely had a lot to do with making 462 whp with a stock ls6 clutch.
$50 plus shipping for both (PM for quote).
Clutch and slave are available.
Slave had occasional clutch dust issues (see also http://www.youtube.com/watch?v=gBbsy0LjUvE) but this likely had a lot to do with making 462 whp with a stock ls6 clutch.
$50 plus shipping for both (PM for quote).
