Collection of lt1 parts
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Dec 2007
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Collection of lt1 parts
Ok this is what I have in my way and want gone.
2 Full sets of standard summit full roller rockers. I used them on both my lt1s with a little clearance work. The come with the poly locks. The are 1.6 3/8's studs. One silver set has 800miles. The other set Blue has like 40miles. They are suppose to be made by proform. Gave $200 for each set. $75 First come first serve to which ones. Sold!!!
95 lt1 block. Punched .060 over. Clearanced for a 383 with h-beams. Block was decked ever so much. How much i never got the spec's. Has regular arp bolts not studs. Valve seat got a piston. Groved a cyclinder. Had that cyclinder sleeved(which cam out perfect). Had it line honed, dipped and cleaned along with decked at that time. Was painted and water got on it. Cyclinder are fine but will need dipped and cleaned. Then the cyclinders honed. What it was had motor built. Messed up in 800miles. Then had the other work done. And been setting. Still see hone marks in the cyclinders.
$200 New price $75. It's in my way.
95-97 intake. Bare New price $25 Or will throw in stock tb for $10 more Pending sale on bare intake
Vented opti of a 94-95 buick road master. Suppose to have 102k miles. Opti looks recently replace. Will fit 95-97 f-body or any other car without spine drive setup. $20 SOLD!!!!!
Opti harness that looks not to old but if is it is in good shape. But has clip that holds connector into opti broke off. Stays just fine. $5
B-body Iron heads. Suppose to have 102k miles. In good shape. Complete heads with rockers,springs and studs. Perfector for someone needing a studs,stock retainers or valves for either lt1 heads. $15
Steam pipe for the heads. $10 New price $5 Sold
B-body water pump. It looks not to old. Doesn't leak out of the weep hole. Motor it came off of has 102k $20 New Price $10
Stock balancer $5
Stock b-body hub pefect shape $5
Stock b-body power steering pump. 102k miles Rusted a bit $10 New Price $5
Stock lt1 flex plate $15 New Price $5
Stock b-body cam 102k miles $25New Price $15
Stock b-body oil pan $10 New price $5
Stock manifolds off a b-body $5 New price Free if anyone wants them just pay shipping
Stock lt1 timing cover $10 Sold!
Stock lt1 lifter and push rods from a 94-95 lt1 b-body with 102k miles. $15 New price $10
Stock manifolds off a 95 trans am $10 New Price $5
Stock 24lb injectors in real good shape. 102k miles Not greasy or dirty really at all $20 New price $15
Stock 24lb injectors out of my 95 t/a 130k miles $10
Stock 95-97 fuel rails $10
Stock Icm looks new. But no way to tell if it isn't it would have 102k miles on it $10
Stock coil also looks new. But no way to tell though. If not it would has 102k miles on it $5
Misc emission hoses. Like air pump hoses. Just ask if you need something. I will see if I have it
Egr valve that doesn't look that old might have 102k miles. Worked fine from what I could tell. $10
Stock lt1 valve covers. $10
B-body accessory bracket $5
Not sure what else I may have. If you need anything motor related ask. And I will see what I can find. Here is link to thread on ls1lt1 where I am most of the time at. http://www.ls1lt1.com/forum/showthread.php?t=32394
Pics of what I have left at bottom of page.
2 Full sets of standard summit full roller rockers. I used them on both my lt1s with a little clearance work. The come with the poly locks. The are 1.6 3/8's studs. One silver set has 800miles. The other set Blue has like 40miles. They are suppose to be made by proform. Gave $200 for each set. $75 First come first serve to which ones. Sold!!!
95 lt1 block. Punched .060 over. Clearanced for a 383 with h-beams. Block was decked ever so much. How much i never got the spec's. Has regular arp bolts not studs. Valve seat got a piston. Groved a cyclinder. Had that cyclinder sleeved(which cam out perfect). Had it line honed, dipped and cleaned along with decked at that time. Was painted and water got on it. Cyclinder are fine but will need dipped and cleaned. Then the cyclinders honed. What it was had motor built. Messed up in 800miles. Then had the other work done. And been setting. Still see hone marks in the cyclinders.
$200 New price $75. It's in my way.
95-97 intake. Bare New price $25 Or will throw in stock tb for $10 more Pending sale on bare intake
Vented opti of a 94-95 buick road master. Suppose to have 102k miles. Opti looks recently replace. Will fit 95-97 f-body or any other car without spine drive setup. $20 SOLD!!!!!
Opti harness that looks not to old but if is it is in good shape. But has clip that holds connector into opti broke off. Stays just fine. $5
B-body Iron heads. Suppose to have 102k miles. In good shape. Complete heads with rockers,springs and studs. Perfector for someone needing a studs,stock retainers or valves for either lt1 heads. $15
Steam pipe for the heads. $10 New price $5 Sold
B-body water pump. It looks not to old. Doesn't leak out of the weep hole. Motor it came off of has 102k $20 New Price $10
Stock balancer $5
Stock b-body hub pefect shape $5
Stock b-body power steering pump. 102k miles Rusted a bit $10 New Price $5
Stock lt1 flex plate $15 New Price $5
Stock b-body cam 102k miles $25New Price $15
Stock b-body oil pan $10 New price $5
Stock manifolds off a b-body $5 New price Free if anyone wants them just pay shipping
Stock lt1 timing cover $10 Sold!
Stock lt1 lifter and push rods from a 94-95 lt1 b-body with 102k miles. $15 New price $10
Stock manifolds off a 95 trans am $10 New Price $5
Stock 24lb injectors in real good shape. 102k miles Not greasy or dirty really at all $20 New price $15
Stock 24lb injectors out of my 95 t/a 130k miles $10
Stock 95-97 fuel rails $10
Stock Icm looks new. But no way to tell if it isn't it would have 102k miles on it $10
Stock coil also looks new. But no way to tell though. If not it would has 102k miles on it $5
Misc emission hoses. Like air pump hoses. Just ask if you need something. I will see if I have it
Egr valve that doesn't look that old might have 102k miles. Worked fine from what I could tell. $10
Stock lt1 valve covers. $10
B-body accessory bracket $5
Not sure what else I may have. If you need anything motor related ask. And I will see what I can find. Here is link to thread on ls1lt1 where I am most of the time at. http://www.ls1lt1.com/forum/showthread.php?t=32394
Pics of what I have left at bottom of page.
Last edited by 2fast4u88; 12-22-2009 at 02:39 AM.
#6
Teching In
Thread Starter
iTrader: (3)
Join Date: Dec 2007
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Anything that may have paint on it or dirty. Will be cleaned off also.
I have all of these the rest were in my dd that the woman had. If anyone wants them I will get pics of all
I can port match these, Port them, Do a new stock valve job, Install new valve seals which ever. If someone one wanted that done on the cheap. Just pm me for price on anything like that.
I have all of these the rest were in my dd that the woman had. If anyone wants them I will get pics of all
I can port match these, Port them, Do a new stock valve job, Install new valve seals which ever. If someone one wanted that done on the cheap. Just pm me for price on anything like that.
Last edited by 2fast4u88; 12-10-2009 at 11:56 PM.
#7
Teching In
Thread Starter
iTrader: (3)
Join Date: Dec 2007
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
TTT If I may have forgot pics or to add something. Check out my orginal forsale thread here http://www.ls1lt1.com/forum/showthread.php?t=32394