LT1 custom fuel rails, opti, socketed OBD pcm, AC delete ETC.
#1
11 Second Club
Thread Starter
iTrader: (8)
Join Date: Mar 2007
Location: Windsor, Ontario Canada
Posts: 569
Likes: 0
Received 3 Likes
on
3 Posts
LT1 custom fuel rails, opti, socketed OBD pcm, AC delete ETC.
Well I have some custom -8an LT1 rails.
I didn’t even think of posting them with the intake I just sold for some reason.
Like stated they are made with each rail having a -8an, one has a female and one has a Male connector so you never mess up return/feed.
Worked flawless for the 3 years I have been using them! I converted to an aeromotive FPR that was mounted elsewhere.
$40 plus ship.
1 Bar Map
$20 plus ship
LT1 ICM
$30 plus ship
2 bar map (brand new)
$40 plus ship
Opti with cap (vented) (worked prefect I have spun it to 7000 no issues, no leaky water pumps etc. Worked great on my 600whp setup just converted to a single plane and SBC dizzy. This was taken apart and the screws were loc-tited to help hold them in (main reason for falure)
$90 plus ship
Accel 8mm wires (brand new in box)
$50 plus ship
OBD 1 PCM (socketed from pcmforless)
$80 plus ship
If I had the car running and together I could change the tune (both have turbo tunes (low timing etc))
I could possibly use my buddies truck to hook it up and tune it for a mild built LT1 or a 420NA rwhp 383 with a good size cam (20 bucks more)
GM 1LE AC delete pulley with gator-grip belt (500km on it)
$50 plus ship
Also I would be interested in trading for some things….
Alternator relocation bracket, SBC spark plug wire set
Jay
here are the rails on the intake...
I didn’t even think of posting them with the intake I just sold for some reason.
Like stated they are made with each rail having a -8an, one has a female and one has a Male connector so you never mess up return/feed.
Worked flawless for the 3 years I have been using them! I converted to an aeromotive FPR that was mounted elsewhere.
$40 plus ship.
1 Bar Map
$20 plus ship
LT1 ICM
$30 plus ship
2 bar map (brand new)
$40 plus ship
Opti with cap (vented) (worked prefect I have spun it to 7000 no issues, no leaky water pumps etc. Worked great on my 600whp setup just converted to a single plane and SBC dizzy. This was taken apart and the screws were loc-tited to help hold them in (main reason for falure)
$90 plus ship
Accel 8mm wires (brand new in box)
$50 plus ship
OBD 1 PCM (socketed from pcmforless)
$80 plus ship
If I had the car running and together I could change the tune (both have turbo tunes (low timing etc))
I could possibly use my buddies truck to hook it up and tune it for a mild built LT1 or a 420NA rwhp 383 with a good size cam (20 bucks more)
GM 1LE AC delete pulley with gator-grip belt (500km on it)
$50 plus ship
Also I would be interested in trading for some things….
Alternator relocation bracket, SBC spark plug wire set
Jay
here are the rails on the intake...