Turbo kit from "fastest stock short block car"
03-06-2011, 06:06 PM
#41
I dont know how much lower I can go on the price. I do know that you cant go buy something and bolt it on this nice that will make this much power for less.....
$4400 shipped kit
$400 shipped k-member(made to work with hotside routing)
$500 shipped radiator, fans, and water pump
$900 for intake, throttle body, rails, and elbow.
$4400 shipped kit
$400 shipped k-member(made to work with hotside routing)
$500 shipped radiator, fans, and water pump
$900 for intake, throttle body, rails, and elbow.
03-18-2011, 05:02 AM
#45
TECH Resident
iTrader: (10)
Join Date: Oct 2002
Location: SW Florida
Posts: 906
Likes: 0
Received 0 Likes
on
0 Posts
Am I missing the power steering pump somewhere? Can you post a better pic of the modded kmember? Which kmember is that anyway? What size tb and elbow is that?
03-18-2011, 10:21 AM
#47
The car has manual steering, and the rack is set-up for that.
I would have no problem doing so if you are seriously interested
It was a PA racing k member made with no mounts and I made solid motor mounts
90mm
What are you trying to get out of this question? There could be 20 places I can take that measurement from and get different numbers. The engine is in the stock location and the radiator is out past the core support as you can see in the pics. Radiator is aftermarket, a stock one is taller, much thinner and has plastic end tanks. Thanks for your interest.
I would have no problem doing so if you are seriously interested
It was a PA racing k member made with no mounts and I made solid motor mounts
90mm
What are you trying to get out of this question? There could be 20 places I can take that measurement from and get different numbers. The engine is in the stock location and the radiator is out past the core support as you can see in the pics. Radiator is aftermarket, a stock one is taller, much thinner and has plastic end tanks. Thanks for your interest.
