FS: T56 Swap, STB, SFC, Borla, Headers, 42lb Injectors, MAF, Air Intakes
12-29-2009, 02:36 AM
#1
FS: T56 Swap, STB, SFC, Borla, Headers, 42lb Injectors, MAF, Air Intakes Category: Steering & Suspension
Price: $1
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): CA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6, LT1/LT4
***PRICES LOWERED***
I will be adding parts to this thread over the next couple of days. If it isn't listed yet I am taking pictures and they will be up soon. Most of these items are coming off a 95k mile 1996 LT1 and others are from various other cars I've owned or pieces I've bought. The parts are located in San Diego, CA.
All prices are OBO and do NOT include shipping.
TONS MORE PICTURES:http://picasaweb.google.com/snvent/9...KuvfK929_pmAE#
Complete T56 Swap Package - $1475 SOLD - Pending Final Payment
Transmission is a stock 1996 T56 and has about 95k miles on it. B&M shifter, short shaft and shifter ball. Light weight flywheel balanced to a stock engine. Clutch hydraulics are newer and clutch has around 5k miles on it. It has an energy suspension mount. Everything works fine and shifts great. NO noises or popping out of gear. This will be everything to swap in a 6spd t56 except for a couple of pig tails for the harness that can be obtained on ebay for $20.
Includes: center console insert/leather boot, upper shifter boot, B&M shifter/ball, T56 transmission, bell housing, clutch/PP, SLP light weight flywheel, clutch master/hydraulics, pedals, skip shift eliminator, dust shield, exhaust and torque arm hangers. Has an Energy Suspension transmission mount. (Pictures coming soon)
Freight Shipping: I only charge what it actually costs and I have shipped similar setups to FL and NC from the depot in CA for $200-250. I shipped one to Texas for $150ish. Shipping will be less if you are closer.
Kenny Brown Black 3-point Strut Tower Brace - $65 OBO
Black powder coated with a few small chips (see the pictures). Overall good condition and nothing a small dab of paint can't take care of. A nice piece that really stiffens up the front end of a 93-02 f-body. (This may not fit traction control cars).
Borla Adjustable 95-97 Exhaust - $290 OBO SOLD - Pending Final Payment
A complete borla adjustable exhaust with dual tips and 4 adjustable plates. Includes the intermediate pipe and clamp. It sounds great and there are no issues with it other than some light scratches on the bottom side of the exhaust tips (can't be seen unless you're under the car). The intermediate pipe will need to be welded to your Y-pipe or have a flange added. Sounds and looks great. This is made for a 95-97 car, but slight cutting and welding could have this fitting a 93-94 car.
Bilstein HD Front and Rear Shocks and Eibach Pro Kit (93-97 F-body) - $289 OBO SOLD
These shocks are a few years old but only have about 15k miles on them. They all felt nice when driving around. No leaks or bouncing. The Eibach Pro kit lowers the car 1.3 inches all around. The springs are in great shape and this kit should be a nice addition to any 93-97 LT1 f-body. The fronts are already assembled which will save you a ton of labor if you have someone else install them and there is no chance the rusty nut on top will prolong the project. The shocks are part number B46-1913(front) and B46-1914(rear) and Eibach spring numbers 3831.002 (rear) and 3831.001 (front).
Edelbrock 95-97 Stainless/Coated Smog Legal Headers - $225 OBO SOLD
These headers are nearly new with only a 1000 miles or so. They are part number 66203 http://www.summitracing.com/parts/EDL-66023/. They are 1 5/8 primary headers with Ti-tech high temperature ceramic coating. They are in very nice condition. These were over $500 new for just the headers and I am including a stainless y-pipe with two random tech cats. The cats and y-pipe would cost hundreds more separately. Also includes locking header bolts. These are CARB and 50 state smog legal with the numbered plate.
Braided Brake Line Kit - $45 OBO SOLD
These braided lines include the banjo bolt and washers. I am pretty sure these are Russel lines, but the label is worn off. They are in good condition and don't leak or have any issues.
Air Foil for Throttle Body - $16 Shipped
This is either and SLP or TPIS air foil for a stock or modified throttle body. It includes the air foil, bolt and retaining clip that the bolt threads into. This makes a great modificication to a stock throttle body to smooth out the airflow. (Pictures coming soon)
Black Tubular Panhard Bar (Non Adjustable) - $50 OBO SOLD
No idea who made it as there are no markings. It is black powdercoated and in good condition. It has poly bushings.
I have sold more than $20K in parts on this and other websites without any negative feedback or problems. I have 100% ebay feedback and references on multiple boards if needed. All prices are OBO and I'm starting the parts out here and on a few other boards, but if they don't sell they are going on EBAY.
Feel free to post, PM or email me at snvent(at)gmail.com
Last edited by Tireburnin; 01-18-2010 at 10:47 PM.
01-01-2010, 02:22 AM
#4
Teching In
iTrader: (3)
Join Date: Feb 2008
Location: Frankfort, Ky
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
What about 90$ shipped for the granatelli maf. Have the money in my paypal right now, just pm me and let me know if that is gonna work for you. If so send me your paypal info in the a pm and we can get this going. Thanks Chris
