FS: Ported LT1 Heads flowing 275/200
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Category: Racing Parts
Price: $750
Location (State): NY
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LT1/LT4
UPDATE: (3/30/2010 @ 11am) I've had 3 or 4 guys express interest in these heads. One has pledged to send a deposit today.
These heads have been on my 96 Z28 since 2003 but the car hasn't been running that entire time. I drove it for about 2 years, then took the motor down for 2.5 years (not my idea, some crook shop I took it to kept it apart that long till I drove from NY to Houston to get it and put it together myself). Then I drove it for from March 2007 till Nov 2007. Then tore the solid roller 383 down to make my current Turbo 355. I drove the turbo motor from April 2008 till Sept of 2009, then bought some Canfield heads which I found a on a good deal. So all told, they really only have a little less than 5 years of actual use. I've just had them steam cleaned, valve seals, valve seals, guides inspected/replaced(if necessary) and new CompCams Bigblock Beehive springs put on. The heads sport Lt4 sized Stainless Ferrea valves.
Here's what they looked like when I picked them up from Will Garza (great head porter in Houston, TX) in 2003.
Exhaust side:
Intake side:
Flow chart:
Exhaust side:
If you want current pictures of the heads, just say so and I'll put them up.
I have a new, vacuum sealed, pack of ARP 7/16" studs I'll include with the heads.
To sum up features:
- Ported stock LT1 Castings
- LT4 Valve sizes
- Stainless Ferrea valves
- Ported by professional Will Garza in Houston, Tx to flow 275/200 (Int/Ex)
- New CompCams Big block Beehive spring kit (good to .600 lift) installed to correct and uniform installation height using correct spring locators
- New valve seals
- New valve job
- Head surface cleaned (Not milled/cut/angled)
- All thread surfaces intact(no helicoils or stripped holes)
- New ARP 7/16" Studs included
Price: $750 plus shipping. Negotiable.
I'm close to Albany, NY for anyone local.
Last edited by mightyquickz28; 03-30-2010 at 12:00 PM.