Lots of LS1/6 Stuff, LS1 and LS6 Block, Crank, Cam, etc.
06-19-2010, 08:39 PM
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Feb 2008
Location: Lakeville, MA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Lots of LS1/6 Stuff, LS1 and LS6 Block, Crank, Cam, etc. Category: Engine - Complete Motors
Price: $0
Location (State): MA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine
I have a Few LS1-LS6 parts floating around that I need gone. All prices are OBO, and shipping is not included. Prefer local pickup, however parts can be shipped. Let me know if anyone has any ?'s.
Thanks,
Dan
LS-6 Stock Pistons and Rods- Removed from 60k engine, 2 pistons were surface rusted to block from sitting with no heads on engine. $50
LS6 Harmonic Balancer- Removed from 60k engine, decent condition. $35
3 LS1/6 Crankshafts- 2 of them came from LS-6 engines, and 1 from a LS-1. The LS-1 crank does have some groves in it and does need a regrind. The other 2 LS-6 Cranks are in running condition, and should only need a polish. LS-1 crank $40, LS-6 Crank $95 each.
LS-6 Stock Cam - Was Removed from 60k LS-6 engine, and is in good condition. $50
LS-6 Valley Pan- Is in good condition, but is missing breather port fitting. $50
2 LS Blocks - 1 is a LS-1, and the other LS-6. The LS-1 block has some surface rust in the boars from sitting, but has been cleaned and pressure tested. It is in need of a line boar, and the piston boars will need to be cleaned. The LS-6 block has been cleaned and pressure tested as well, however will need to be board. 2 of the cylinders have been taken out to 3.907 to try and clean up scratches in the boars. 1 came clean, the other one is 90%. Machine shop said that for a stock or mild build up, block would be fine. So it will need 3.908 pistons and a boar hone. LS-1 and LS-6 Block, $100 each.
Manly Forged Stock Length Connecting Rods - These are for a Stock throw, stock wrist pin size LS-1 or LS-6. Got from another member here on LS1Tech, They are used but in good condition. $225
Trending Topics
06-22-2010, 09:09 PM
#14
Teching In
Thread Starter
iTrader: (4)
Join Date: Feb 2008
Location: Lakeville, MA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
bump...1 crank, rods, cam, valley plate sold. Stock pistons, both blocks, stock rods and pistons still remain. Everything is OBO, make an offer.
Thanks
Thanks