Brand New Fuel Injectors 42lb Delphi 01D030B
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Mar 2004
Location: Atlanta, GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Brand New Fuel Injectors 42lb Delphi 01D030B
Category: Engine - Intake/Fuel
Price: $275
Location (State): GA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
LS Engine?: Fits LS Engine
____________________
Set of eight (8) - Delphi / Lucas
42 lb / hr. '009' Disc Injectors
Part Number Delphi 01D030B (Lucas old 5208009, Lucas New 621031)
Static Flow Rate: 42.29 lb/hr @ 43.5PSI (300kPa) or 320gm/min
Dynamic Flow Rate: 9.96 gm/pulse - 2.5ms pulse width and 10ms repetition rate
Coil Resistance: 15.9 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Additional Information:
Top feed disc injectors use a small disc with six holes around its circumference. The disc rests on a short chimney that surrounds a metering hole. As the disc is raised off the chimney by magnetic force, fuel flows through the holes in the disc, over the walls of the chimney, and out the metering hole to form a full, finely atomized cone.
Performance advantages over pintle injectors (i.e. Ford / Bosch & Accel types) as listed by Delphi:
• The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur.
• Compatible with alternative fuels (i.e. Methanol)
• Longer service life
• High-speed disc action allows wider dynamic flow range for improved idling
• Quieter operation
• Revolutionary disc design resists build up deposits which can affect fuel flow.
• No Fuel leakage for quicker starts
On the injectors themselves it says: "Precision Turbo & Engine 01D030B (this number is on one side) 2742 (this number is on the other)"
_____________________
I bought these brand new because I was going to install a ProCharger supercharger and methanol injection into my LT1 TransAm, but I bought two new project cars so (69 Camaro and single turbo MKIV Supra) so the TA is on the back-burner now
I have 100% positive feedback on eBay (FLGator454) and am a very fast shipper. I can have a LS1tech mod (I think he's a mod) vouch for me if needed.
$275 shipped (to continental US). $275 includes cost of shipping, insurance and PayPal fees.
#4
Teching In
Thread Starter
iTrader: (3)
Join Date: Mar 2004
Location: Atlanta, GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Pictures added
Pics sent.
Here are the pics in case anyone else wants to see:
All 8 injectors are identical, so I didn't think it was necessary to unwrap all of them and take individual pictures, but you can see there are 8 there.
Here are the pics in case anyone else wants to see:
All 8 injectors are identical, so I didn't think it was necessary to unwrap all of them and take individual pictures, but you can see there are 8 there.