L92, LS3, LSA and LS9 low mile cyl heads
#201
ls3 on 317?
Category: Engine - Intake/Fuel
Price: $585
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): WI
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine
and how much for the ls3 intake setup and the heads if there still around
#203
Dec 20
1 set #863 LSA lightly used -$750*
1 set #823 L92 lightly used - $525* More next week
1 set #821 LS3 Lightly used- $625 *
2 sets #799 LS2 Lightly used- $380*
* Complete, assembled including rockers.
****FedEx Ground shipping is $42 for heads****
LS2 TB -$195
LS3/7 TB - $195
LS3 intake complete with rail, inj, MAP, bolts- $365 Soon
LS7 intake complete with rail,inj,MAP, bolts- $425 Soon
LS2/3/7 valve covers with seals & bolts-$77 set
LSA or LS9 valve covers with seals & bolts -$125 set
LS3 coil packs with bolts, brackets mini harness-$170 set
LSA coil packs with bolts, brackets mini harness-$170 set
LS9 coil packs with bolts, brackets -$150 set
As new, red or black LS plug wires $60
Bruce@PowrMax.com
1 set #863 LSA lightly used -$750*
1 set #823 L92 lightly used - $525* More next week
1 set #821 LS3 Lightly used- $625 *
2 sets #799 LS2 Lightly used- $380*
* Complete, assembled including rockers.
****FedEx Ground shipping is $42 for heads****
LS2 TB -$195
LS3/7 TB - $195
LS3 intake complete with rail, inj, MAP, bolts- $365 Soon
LS7 intake complete with rail,inj,MAP, bolts- $425 Soon
LS2/3/7 valve covers with seals & bolts-$77 set
LSA or LS9 valve covers with seals & bolts -$125 set
LS3 coil packs with bolts, brackets mini harness-$170 set
LSA coil packs with bolts, brackets mini harness-$170 set
LS9 coil packs with bolts, brackets -$150 set
As new, red or black LS plug wires $60
Bruce@PowrMax.com
Last edited by See5; 12-20-2011 at 06:15 PM.
#206
TECH Senior Member
iTrader: (71)
What all is needed for the ls3 heads to be installed on an lq9 on a 00 ta? Sorry if you have posted.
I need a price for a set of ls3 heads with the hollow valves with whatever I need as well as a price of an ls3 intake with injectors and rails.
Will my center bold valve covers work with the ls3 heads? Sorry so many questions.. spun a bearing and picked up an lq9 so it was kinda quick.
I need a price for a set of ls3 heads with the hollow valves with whatever I need as well as a price of an ls3 intake with injectors and rails.
Will my center bold valve covers work with the ls3 heads? Sorry so many questions.. spun a bearing and picked up an lq9 so it was kinda quick.
#212
Trader Rating: 47
Join Date: Dec 2002
Location: Hobart, WI
Posts: 874
Currently:
1 set #863 LSA lightly used -$750*
1 set #821 LS3 Lightly used- $625*
* Complete, assembled including rockers.
Heads Fedex >$42
Thanks,
Bruce@PowrMax.com
#213
TECH Fanatic
iTrader: (26)
Join Date: Mar 2010
Location: Milledgeville, GA
Posts: 1,909
Likes: 0
Received 0 Likes
on
0 Posts
Very interested in a set of rectangle ports.
I know that LSA heads are off the supercharged engines and are very similar to the L92/LS3 heads, but can you or anyone else tell me the specific differences between them? I tried searching.
I know that LSA heads are off the supercharged engines and are very similar to the L92/LS3 heads, but can you or anyone else tell me the specific differences between them? I tried searching.
#214
GM says:
"The LSA heads feature a unique "wing'' cast into each intake port to promote a swirling motion that blends the pressurized air-fuel charge. The heads are also cast from a premium A356-T6 alloy, which better manages the heat generated in a supercharged engine. A356-T6 pays particular dividends in the thin bridge area between the intake and exhaust valves, where effective heat dissipation is crucial to both performance and long-term durability. Finally, the LSA heads are rotacast. This process rotates the head mold as the molten alloy cools and essentially eliminates porosity, or microscopic pockets of air trapped in the casting. Rotacasting delivers a stronger part that helps maintain performance and structural integrity over the life of the engine.(The heads are nearly identical between the LS9 and LSA)
Valves are among the most heat-stressed parts in an engine, and their wear resistance is crucial to long-term durability. Those in the LSA are manufactured from a high-chromium steel alloy called SilChrome 1 (The only difference between the LSA's exhaust valves, and the LS9s is that the LS9's are filled with sodium for the extra heat protection -- the LS9s intake valves are made of titanium.), with thicker heads than most other Gen IV V-8s. They promote heat transfer away from the valve face and valve guide to the cooler end of the stem, where it more readily dissipates. This maintains a lower, more uniform valve temperature, reducing wear on the valve guide for better alignment and a consistent seal between the valve seat and valve face over the life of the engine. The intake valves measure 55 mm in diameter and the exhaust valves, 44 mm.
"The LSA heads feature a unique "wing'' cast into each intake port to promote a swirling motion that blends the pressurized air-fuel charge. The heads are also cast from a premium A356-T6 alloy, which better manages the heat generated in a supercharged engine. A356-T6 pays particular dividends in the thin bridge area between the intake and exhaust valves, where effective heat dissipation is crucial to both performance and long-term durability. Finally, the LSA heads are rotacast. This process rotates the head mold as the molten alloy cools and essentially eliminates porosity, or microscopic pockets of air trapped in the casting. Rotacasting delivers a stronger part that helps maintain performance and structural integrity over the life of the engine.(The heads are nearly identical between the LS9 and LSA)
Valves are among the most heat-stressed parts in an engine, and their wear resistance is crucial to long-term durability. Those in the LSA are manufactured from a high-chromium steel alloy called SilChrome 1 (The only difference between the LSA's exhaust valves, and the LS9s is that the LS9's are filled with sodium for the extra heat protection -- the LS9s intake valves are made of titanium.), with thicker heads than most other Gen IV V-8s. They promote heat transfer away from the valve face and valve guide to the cooler end of the stem, where it more readily dissipates. This maintains a lower, more uniform valve temperature, reducing wear on the valve guide for better alignment and a consistent seal between the valve seat and valve face over the life of the engine. The intake valves measure 55 mm in diameter and the exhaust valves, 44 mm.
#215
Dec 21
1 set #863 LSA lightly used -$750*
1 set #799 LS2 Lightly used- $380*
* Complete, assembled including rockers.
****FedEx Ground shipping is $42 for heads****
LS2 TB -$195
LS3/7 TB - $195
LS3 intake complete with rail, inj, MAP, bolts- $365 Soon
LS7 intake complete with rail,inj,MAP, bolts- $425 Soon
LS2/3/7 valve covers with seals & bolts-$77 set
LSA or LS9 valve covers with seals & bolts -$125 set
LS3 coil packs with bolts, brackets mini harness-$170 set
LSA coil packs with bolts, brackets mini harness-$170 set
LS9 coil packs with bolts, brackets -$150 set
As new, red or black LS plug wires $60
Bruce@PowrMax.com
1 set #863 LSA lightly used -$750*
1 set #799 LS2 Lightly used- $380*
* Complete, assembled including rockers.
****FedEx Ground shipping is $42 for heads****
LS2 TB -$195
LS3/7 TB - $195
LS3 intake complete with rail, inj, MAP, bolts- $365 Soon
LS7 intake complete with rail,inj,MAP, bolts- $425 Soon
LS2/3/7 valve covers with seals & bolts-$77 set
LSA or LS9 valve covers with seals & bolts -$125 set
LS3 coil packs with bolts, brackets mini harness-$170 set
LSA coil packs with bolts, brackets mini harness-$170 set
LS9 coil packs with bolts, brackets -$150 set
As new, red or black LS plug wires $60
Bruce@PowrMax.com