Ford 80 lb/hr injectors
10-23-2010, 11:31 AM
#1
Ford 80 lb/hr injectors Category: Engine - Intake/Fuel
Price: $400
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird, Front wheel drive vehicles
Location (State): MA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
LS Engine?: Fits LS Engine
These go for $460 from Summit/Jegs. I want $400+ shipping, but I'll listen to offers. They're in a very small/light box from Ford, so shipping will not cost much at all. I will ONLY ship via a secure method with tracking and delivery confirmation.
EV6/Uscar connector, will work on just about any GM/Ford and other cars (you might need different o-rings or adapter connectors for your wire harness)...these will work with any fuel injected car that uses high impedance injectors.
These are OEM on the new FR500CJ Cobra Jet and are actually made by Seimens.
80 lb/hour rating is at 39.5 PSI, so at the 58 PSI that most newer GM's run at, they're actually going to be closer to 97 lb/hour injectors...new flow = root(new pressure / old pressure) * old flow)...root(58/39.5)*80=~96.9.
10-25-2010, 10:28 PM
#4
I also need an Aeromotive 16306 billet pump speed controller, 12321 -10 AN 10 micron fuel filter, comp cams LS1 rock trunnion bearing kit, patriot extreme dual valve spring kit...a breather tank for a dry sump setup...all still I'm willing to think about in trade...preferably if it's new parts though, not really looking for anything used other than maybe the speed controller if you have all the wires it comes with.
