moshbmx1

iTrader: (1)

Category: Accessories
Price: $0
Location (State): TX
Item Condition: Used
Shipping Information: Item Can be Shipped
LS Engine?: Fits LS Engine

I am selling a virtually new Mallory 685 ignition box. My first box had some issues and was sent to Mallory and a brand new box was sent back. This new box was installed and tested but never used for a nitrous pass which was its intended use on my set-up. It was on the car for less than 100 miles. I am including my wiring harness that will reach from the front to the back of an f-body, I had the box mounted in the hatch area. All factory items and parts that came with the box will be included.

I also have the MSD 8876 harness that will easily integrate this box into the factory harness that I used on my set-up. I will sell this for an extra $15 if the buyer is interested. These harnesses reduce the installation time, reduce or eliminate cut wires, and allow you to quickly convert back to the factory ignition.
Harness application chart:
Universal No
Make CHEVROLET
Beginning Year 1987
Ending Year 1995
Ignition Type HEI
Application Notes Fits GM dual connector coils.


Location: Fort Worth, Texas
BOTH SOLD!


Ignition Box Output Capacitive discharge
Circuitry Digital
Rev Limiter Yes
Timing Retard One-stage
Data Acquisition No
CD Voltage Output to Coil 525 V
Current Draw 0.7 amps per 1,000 rpm
Spark Output (millijoules) 135 Millijoules
Minimum Operating Voltage 8 V
Maximum Operating Voltage 16 V
Length (in) 7.000 in.
Height (in) 2.750 in.
Width (in) 6.000 in.
Ignition Box Color Red
Coil Included No

-These HyFire VI Digital CD ignitions from Mallory give you optimum performance, accuracy, and reliability in a microprocessor-controlled CD ignition system. They have state-of-the-art digital circuitry with four times faster processing, and the ability to boost the proportional retard capacity with the optional harness. They feature an easy-to-use digital display with push button controls, to let you see exactly what's going on in real time. You get two-stage rev limiting in 100 rpm increments, an automatic start retard circuit for easier starting, and a built-in rpm window switch that is ideal for nitrous. They're very versatile and work great for supercharged, turbo charged, and nitrous applications.






MSD 8876 Harness (not included in price, additional $15)

moshbmx1

iTrader: (1)

bumpbump

moshbmx1

iTrader: (1)

bumpbump

moshbmx1

iTrader: (1)

Messages replied! Bump

moshbmx1

iTrader: (1)

Both sold!