joshtownsend

iTrader: (16)

Category: Drivetrain
Price: $450
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): TX
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine

I have a set of Wiseco blower/turbo pistons for sale. They are for a stock LS1 bore and are 3.905 in size. The part number is K392X3905. These are used pistons and have about 700 miles on them. They are full dish and have -25cc on them. I have cleaned them face of the piston up to show there is no damage on them. They have the number 6392f3905 on them. They come with GFX rings and look to be in great shape.

Here is the back ground on them. These pistons are were in a motor that I bought from Jeff, Inspector 12, that was used in one of his cars. He pulled the motor out with 700 or so miles and sent it to Eric at HKE to have it looked at. They found an issue with a bearing and replace it and at some point, 2 of the pistons were sent out to be re-coated. They suspect that the coating was nicked up on the 2. I was assured that these were all from the same batch and were not changed out becuase of an issues. When Jeff got the motor back, he never installed it and then sold it to me some time later. When i got it, i deiced that I wanted more compression becuase I run a very small cam so i swapped them out. This is as much info as i have on these. Please feel free to ask Jeff any questions as to the info that i have provided.

Here is a link to more data about the piston. You have to look under it's number K392X3905. It will show you compression and such.

http://www.flatlanderracing.com/wise...ons-sbc07.html

Please feel free to contact me with any questions and I will help you as best as I can.


Price is set at $450 OBO and I can meet you in Houston. I will ship these is someone wants t pay for shipping. Thanks Josh

fastsspr

iTrader: (49)

they are for factory 6.098 rods or 6.125 ?

hotrod18_69

iTrader: (4)

SOLD! Thanks Josh

joshtownsend

iTrader: (16)

Indeed.. dropped off this afternoon Thanks again.