200cc Advanced Airflow Engineering fully CNC'D Heads
#1
Launching!
Thread Starter
iTrader: (12)
Join Date: Sep 2009
Location: burton mi
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
200cc Advanced Airflow Engineering fully CNC'D Heads
Category: Engine - Power Adders
Price: $450
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): MI
Item Condition: Used
Engine: LT1/LT4
LS Engine?: Non-LS Part
Fully CNC'd heads by Advanced Airflow Engineering.
-100% CNC'd intake ports to 200cc
-100% CNC'd exhaust ports
-100% CNC'd combustion chambers. They have also been polished (milled to approx. 52-54cc) (this will yield 11.5:1 compression with a .026" head gasket)
- Manley 2.00"/1.60" Pro-Flo valves. These are stainless steel, lightweight, one-piece, undercut at the head and swirl polished.
these heads are very comparable to AIs 200cc head. there are 3 bad valve seats in them though(they started cracking and fell out) i showed a pic of one already took out. i was quoted 300 to replace all 16 valve seats, but if you only want to replace the ones that are bad, then it would be even less!!! the heads will come with the valves, but not rocker studs,springs ect. so just throw your 1.6 roller rockers on them and some springs and you will be all set after the seats are put in. These heads work VERY well.. they were on a boosted lt1 before mine with 5psi it was going mid 10s.. so they flow very well! i am willing to let them go for $450. here are some pics.. also they are located in burton MI, willing to ship on buyers expense. they also just came back from the machine shop, they were dipped cleaned ect.
Last edited by lttransam; 03-17-2011 at 03:24 PM.
#3
Launching!
Thread Starter
iTrader: (12)
Join Date: Sep 2009
Location: burton mi
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
i was quoted 350 to replace all the valve seats. but it basically came out to 20 bucks a seat to fix, so if you only wanted to replace the ones that were bad you could get out of it pretty cheap, and have a good set of heads.